Editing XLD Configuration

Jump to: navigation, search

Warning: You are not logged in.

Your IP address will be recorded in this page's edit history.
The edit can be undone. Please check the comparison below to verify that this is what you want to do, and then save the changes below to finish undoing the edit.
Latest revision Your text
Line 147: Line 147:
 
Here's mine below. YMMV. If it is important to you to burn a CD from your rips that matches the exact offset of the retail disc then you must calculate the correct "Write samples offset" and enter the value.
 
Here's mine below. YMMV. If it is important to you to burn a CD from your rips that matches the exact offset of the retail disc then you must calculate the correct "Write samples offset" and enter the value.
  
To find the write offset of your cd/dvd drive, XLD suggests the following:
 
  
"Note that the verification process requires an offset correction, so both read/write offset value (in CD Burn pref) should be set correctly for the exact match. Otherwise the verification will fail. If you are not sure about the write offset of your drive, burn an AccurateRip verifiable image with the write offset 0, and rip the burned disc with the correct read offset. Then, the AR report will suggest offset values, and the relative one will be the write offset."
+
[[Image:Configuring_XLD_cd_burn.jpg|center|"CD Burn" tab]]
  
 
[[Image:Configuring_XLD_cd_burn.jpg|center|"CD Burn" tab]]
 
  
 
== Save your settings and set up profiles ==
 
== Save your settings and set up profiles ==

Please note that all contributions to Hydrogenaudio Knowledgebase are considered to be released under the GNU Free Documentation License 1.2 (see Hydrogenaudio Knowledgebase:Copyrights for details). If you do not want your writing to be edited mercilessly and redistributed at will, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource. Do not submit copyrighted work without permission!

Cancel | Editing help (opens in new window)