REACT:Adding Support For Monkey's Audio - Revision history

73.167.61.121: /* Piping to Mac.exe */ fix broken link for shntool

2021-07-17T15:10:57Z

Piping to Mac.exe: fix broken link for shntool

← Older revision		Revision as of 15:10, 17 July 2021
Line 74:		Line 74:

	====Piping to Mac.exe====		====Piping to Mac.exe====
	The offical version of mac.exe does not support piping, but the version that can be found on the [http://~~etree~~.org~~/shnutils~~/shntool/ shntool] website does. If you are using this version you can save some time, by replacing the code above with the following:		The offical version of mac.exe does not support piping, but the version that can be found on the [http://shnutils.freeshell.org/shntool/ shntool] website does. If you are using this version you can save some time, by replacing the code above with the following:

	IF NOT @Ape@==1 GOTO end_ape_tracks		IF NOT @Ape@==1 GOTO end_ape_tracks
Line 91:		Line 91:

	This allows [[ACDIR]] to pipe the audio data to [[Monkey's Audio\|mac.exe]], rather than creating temporary WAVE files.		This allows [[ACDIR]] to pipe the audio data to [[Monkey's Audio\|mac.exe]], rather than creating temporary WAVE files.


	==REACT-track.cfg==		==REACT-track.cfg==

Jan at 19:36, 29 July 2010

2010-07-29T19:36:25Z

← Older revision		Revision as of 19:36, 29 July 2010
Line 131:		Line 131:
	* [http://nyaochi.sakura.ne.jp/xoops/modules/mysoftwares/tc_2.html ACDIR]		* [http://nyaochi.sakura.ne.jp/xoops/modules/mysoftwares/tc_2.html ACDIR]

	[[Category:REACT\|Adding Support For Monkey's Audio]]		[[Category:REACT Guides\|Adding Support For Monkey's Audio]]

Synthetic Soul: Added piping info

2008-04-06T21:07:10Z

Added piping info

← Older revision		Revision as of 21:07, 6 April 2008
Line 41:		Line 41:
	As [[Monkey's Audio]] does not support inline tagging this section uses '''[[Monkey's Audio\|mac.exe]]''' to encode, and then '''[[Tag_(tagger)\|tag.exe]]''' to add [[APEv2]] tags to the newly-created [[Monkey's Audio]] file. You will need to add '''[[Monkey's Audio\|mac.exe]]''' and '''[[Tag_(tagger)\|tag.exe]]''' to your [[REACT]] '''tools''' directory.		As [[Monkey's Audio]] does not support inline tagging this section uses '''[[Monkey's Audio\|mac.exe]]''' to encode, and then '''[[Tag_(tagger)\|tag.exe]]''' to add [[APEv2]] tags to the newly-created [[Monkey's Audio]] file. You will need to add '''[[Monkey's Audio\|mac.exe]]''' and '''[[Tag_(tagger)\|tag.exe]]''' to your [[REACT]] '''tools''' directory.

	IF NOT @ImageExt@==ape GOTO ~~end_Ape_image~~		IF NOT @ImageExt@==ape GOTO end_ape_image
	SET dest="@ImageDir_Ape@"		SET dest="@ImageDir_Ape@"
	IF NOT EXIST %dest% MKDIR %dest%		IF NOT EXIST %dest% MKDIR %dest%
Line 49:		Line 49:
	MOVE /Y "@cuesheet@" %dest%		MOVE /Y "@cuesheet@" %dest%
	IF %have_cover%==1 COPY /Y "@cover@" %dest%\"@basename@.jpg"		IF %have_cover%==1 COPY /Y "@cover@" %dest%\"@basename@.jpg"
	:~~end_Ape_image~~		:end_ape_image

	===REM ---- Tracks ---- ===		===REM ---- Tracks ---- ===
Line 60:		Line 60:
	# Delete the [[WAV\|WAVE]] file.		# Delete the [[WAV\|WAVE]] file.

	IF NOT @Ape@==1 GOTO ~~end_Ape_tracks~~		IF NOT @Ape@==1 GOTO end_ape_tracks
	SET dest="@TrackDir_Ape@"		SET dest="@TrackDir_Ape@"
	IF NOT EXIST %dest% MKDIR %dest%		IF NOT EXIST %dest% MKDIR %dest%
Line 71:		Line 71:
	IF EXIST "@albumfile@.[].cue" COPY /Y "@albumfile@.[].cue" .		IF EXIST "@albumfile@.[].cue" COPY /Y "@albumfile@.[].cue" .
	POPD		POPD
	:~~end_Ape_tracks~~		:end_ape_tracks

			====Piping to Mac.exe====
			The offical version of mac.exe does not support piping, but the version that can be found on the [http://etree.org/shnutils/shntool/ shntool] website does. If you are using this version you can save some time, by replacing the code above with the following:

			IF NOT @Ape@==1 GOTO end_ape_tracks
			SET dest="@TrackDir_Ape@"
			IF NOT EXIST %dest% MKDIR %dest%
			PUSHD %dest%
			IF @various@==1 SET VA_tag=-t $qalbum artist=@VA@$q
			@tools@\acdir.exe --overwrite --output "%TrackName%.ape" --pipe "@tools@\mac.exe - $#o @Opt_Ape@ && @tools@\tag.exe %RG_Ape_acdir% %VA_tag% -t artist=$#a -t album=$#T -t title=$#t -t track=$n/$N -t year=$q@year@$q -t genre=$q@genre@$q -t comment=$q@comment@$q -t encodedby=$q%USERNAME%$q -t encodersettings=$qMonkey's Audio @Ver_Ape@ @Opt_Ape@$q $q%TrackName%.ape$q" "@sourcecuesheet@"
			COPY /Y "@eaclog@" "EAClog.txt"
			IF %have_cover%==1 COPY /Y "@cover@" "folder.jpg"
			IF EXIST "@albumfile@.[].cue" COPY /Y "@albumfile@.[].cue" .
			POPD
			TITLE "@album@"
			POPD
			:end_ape_tracks

			This allows [[ACDIR]] to pipe the audio data to [[Monkey's Audio\|mac.exe]], rather than creating temporary WAVE files.


Line 86:		Line 105:
	As [[Monkey's Audio]] does not support inline tagging this section uses '''[[Monkey's Audio\|mac.exe]]''' to encode, and then '''[[Tag_(tagger)\|tag.exe]]''' to add [[APEv2]] tags to the newly-created [[Monkey's Audio]] file. You will need to add '''[[Monkey's Audio\|mac.exe]]''' and '''[[Tag_(tagger)\|tag.exe]]''' to your [[REACT]] '''tools''' directory.		As [[Monkey's Audio]] does not support inline tagging this section uses '''[[Monkey's Audio\|mac.exe]]''' to encode, and then '''[[Tag_(tagger)\|tag.exe]]''' to add [[APEv2]] tags to the newly-created [[Monkey's Audio]] file. You will need to add '''[[Monkey's Audio\|mac.exe]]''' and '''[[Tag_(tagger)\|tag.exe]]''' to your [[REACT]] '''tools''' directory.

	IF NOT @Ape@==1 GOTO ~~end_Ape_tracks~~		IF NOT @Ape@==1 GOTO end_ape_tracks
	IF NOT EXIST %TrackDir_Ape% MKDIR %TrackDir_Ape%		IF NOT EXIST %TrackDir_Ape% MKDIR %TrackDir_Ape%
	PUSHD %TrackDir_Ape%		PUSHD %TrackDir_Ape%
Line 97:		Line 116:
	TITLE @track@/@numtracks@ - "@album@"		TITLE @track@/@numtracks@ - "@album@"
	POPD		POPD
	:~~end_Ape_tracks~~		:end_ape_tracks

Synthetic Soul: Initial version

2008-04-06T18:01:31Z

Initial version

New page

To configure [[REACT]] to use an encoder that is not supported with the original INI and CFG files you will need to make changes to both the INI and CFG file you require.

Below you will find additional text that you will need to add to your config files to use [[Monkey's Audio]] with [[REACT]]. This is meant as an example, to demonstrate what is required to add any codec that you choose. The naming schemes and meta data used are based on the examples in the initial INI and CFG files; you may want to change them to fit your methodology.

==REACT.ini==

===Settings===
Specify that we want to use [[Monkey's Audio]] as our image format.

ImageExt=ape

===UserTrackFormats===
Specify that we want to encode tracks using [[Monkey's Audio]].

Ape=1

===UserOutputNames===
Specify the directories for [[Monkey's Audio]] images and tracks.

ImageDir_Ape=@OutRoot@\APE-images\$cdartist$
TrackDir_Ape=@OutRoot@\APE\$cdartist$\[$year$] $album$

===UserSettings===
Specify any encoding options and the version used.

Opt_Ape=-c2000
Ver_Ape=4.01

==REACT-image.cfg==

===REM ** Transfer RG values from Wavgain calculations, instead of recalculation.===
Add the text below under the comment above, with the other similar lines.

SET RG_Ape=-t "replaygain_album_gain=%album_gain% dB" -t "replaygain_album_peak=%album_peak%"
SET RG_Ape_acdir=-t $qreplaygain_album_gain=%album_gain% dB$q -t $qreplaygain_album_peak=%album_peak%$q

===REM ---- Image ----===
Add the text below under the comment above, with the other similar lines.

As [[Monkey's Audio]] does not support inline tagging this section uses '''[[Monkey's Audio|mac.exe]]''' to encode, and then '''[[Tag_(tagger)|tag.exe]]''' to add [[APEv2]] tags to the newly-created [[Monkey's Audio]] file. You will need to add '''[[Monkey's Audio|mac.exe]]''' and '''[[Tag_(tagger)|tag.exe]]''' to your [[REACT]] '''tools''' directory.

IF NOT @ImageExt@==ape GOTO end_Ape_image
SET dest="@ImageDir_Ape@"
IF NOT EXIST %dest% MKDIR %dest%
@tools@\mac.exe "@source@" "@image@" @Opt_Ape@
@tools@\tag.exe %RG_Ape% -t "%ArtistField%=@cdartist@" -t album="@album@" -t totaltracks="@numtracks@" -t year="@year@" -t genre="@genre@" -t comment="@comment@" -t encodedby="%USERNAME%" -t encodersettings="Monkey's Audio @Ver_Ape@ @Opt_Ape@" -f cuesheet="@cuesheet@" -f eaclog="@eaclog@" "@image@"
MOVE /Y "@image@" %dest%
MOVE /Y "@cuesheet@" %dest%
IF %have_cover%==1 COPY /Y "@cover@" %dest%\"@basename@.jpg"
:end_Ape_image

===REM ---- Tracks ---- ===
Add the text below under the comment above, with the other similar lines.

This section uses [[ACDIR]] to create [[Monkey's Audio]] track files. It is complicated by the fact that [[Monkey's Audio]] does not support piping, or inline tagging. The section uses [[ACDIR]] to first split the image [[WAV|WAVE]] into tracks [[WAV|WAVEs]], and then uses [[ACDIR]] again to execute mutiple commands for each track, these being:

# Use [[Monkey's Audio|mac.exe]] to encode the relevant track [[WAV|WAVE]].
# Use [[Tag_(tagger)|tag.exe]] to add [[APEv2]] tags to the [[Monkey's Audio]] file.
# Delete the [[WAV|WAVE]] file.

IF NOT @Ape@==1 GOTO end_Ape_tracks
SET dest="@TrackDir_Ape@"
IF NOT EXIST %dest% MKDIR %dest%
PUSHD %dest%
IF @various@==1 SET VA_tag=-t $qalbum artist=@VA@$q
@tools@\acdir.exe --overwrite --output "%TrackName%.wav" --extract "@sourcecuesheet@"
@tools@\acdir.exe --exec "@tools@\mac.exe $q%TrackName%.wav$q $q%TrackName%.ape$q @Opt_Ape@ && @tools@\tag.exe %RG_Ape_acdir% %VA_tag% -t artist=$#a -t album=$#T -t title=$#t -t track=$n/$N -t year=$q@year@$q -t genre=$q@genre@$q -t comment=$q@comment@$q -t encodedby=$q%USERNAME%$q -t encodersettings=$qMonkey's Audio @Ver_Ape@ @Opt_Ape@$q $q%TrackName%.ape$q && DEL $q%TrackName%.wav$q" "@sourcecuesheet@"
COPY /Y "@eaclog@" "EAClog.txt"
IF %have_cover%==1 COPY /Y "@cover@" "folder.jpg"
IF EXIST "@albumfile@.[*].cue" COPY /Y "@albumfile@.[*].cue" .
POPD
:end_Ape_tracks

==REACT-track.cfg==

===REM ============== Begin Main Script ================== ===
Add the text below under the comment above, with the other similar lines.

SET TrackDir_Ape="@TrackDir_Ape@"

===REM ---- Track ---- ===
Add the text below under the comment above, with the other similar lines.

As [[Monkey's Audio]] does not support inline tagging this section uses '''[[Monkey's Audio|mac.exe]]''' to encode, and then '''[[Tag_(tagger)|tag.exe]]''' to add [[APEv2]] tags to the newly-created [[Monkey's Audio]] file. You will need to add '''[[Monkey's Audio|mac.exe]]''' and '''[[Tag_(tagger)|tag.exe]]''' to your [[REACT]] '''tools''' directory.

IF NOT @Ape@==1 GOTO end_Ape_tracks
IF NOT EXIST %TrackDir_Ape% MKDIR %TrackDir_Ape%
PUSHD %TrackDir_Ape%
IF @various@==1 SET VA_tag=-t "album artist=@VA@"
ECHO ON
@tools@\mac.exe "@source@" "%TrackName%.ape" @Opt_Ape@
@tools@\tag.exe %VA_tag% -t artist="@artist@" -t album="@album@" -t track="@track@/@numtracks@" -t title="@title@" -t year="@year@" -t genre="@genre@" -t comment="@comment@" -t encodedby="%USERNAME%" -t encodersettings="Monkey's Audio @Ver_Ape@ @Opt_Ape@" "%TrackName%.ape"
@ECHO OFF
IF %have_cover%==1 IF NOT EXIST folder.jpg COPY "@cover@" folder.jpg
TITLE @track@/@numtracks@ - "@album@"
POPD
:end_Ape_tracks

==Related Thread==
This tip is a result of a the discussion in the thread [http://www.hydrogenaudio.org/forums/index.php?showtopic=62321 Using REACT 2.0 - I need help.......].

==See Also==
* [[Monkey's Audio]]
* [[Tag_(tagger)|Case's Tag]]

==External Links==
* [http://nyaochi.sakura.ne.jp/xoops/modules/mysoftwares/tc_2.html ACDIR]

[[Category:REACT|Adding Support For Monkey's Audio]]