Hydrogenaudio Knowledgebase - User contributions [en]

Lossless comparison

2014-04-02T21:21:19Z

94.209.155.125: Added TAK

The '''lossless comparison page''' aims to gather information about lossless codecs available so users can make an informed decision as to what lossless codec to choose for their needs.

== Introduction ==
Given the enormous amount of [[lossless]] audio compressor choices available, it is a very difficult task to choose the one most suited for each person's needs. Some people only take into consideration compression performance when choosing a codec, but as the following table and article shows, there are several other features worth taking into consideration when making a choice.

For example, users wanting good multiplatform compatibility and robustness (e.g., people sharing live recordings) would favour [[WavPack]] or [[FLAC]]. Another user, looking for the very highest compression available, would go with [[OptimFROG]]. Someone wanting portable support would use [[FLAC]] or [[ALAC]], and so on. En fin, this is not a matter worth getting too worked up about. If you later find out the codec you chose isn't the best for your needs, you can just transcompress to another format, without risk of losing quality.

'''Note:''' for latest comparison of lossless compression, scroll down to the [[Lossless comparison#External links|Links section of this page]].

== Comparison Table ==


{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | FLAC
| width="95px" style="background: #00FFFF" | WavPack
| width="95px" style="background: #00FFFF" | TAK
| width="95px" style="background: #00FFFF" | Monkey's
| width="95px" style="background: #00FFFF" | OptimFROG
| width="95px" style="background: #00FFFF" | ALAC
| width="95px" style="background: #00FFFF" | WMA
|-
|align="left" style="background: #FFFF99" | Encoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #CCFFCC" | fast
| style="background: #CCFFCC" | fast
|-
|align="left" style="background: #FFFF99" | Decoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #00FF00" | very fast
| style="background: #FF9900" | slow
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
|-
|align="left" style="background: #FFFF99" | Compression{{ref label|speed|A|A}}
| style="background: #CCFFCC" | 57.0%
| style="background: #CCFFCC" | 57.1%
| style="background: #00FF00" | 56.0%
| style="background: #00FF00" | 55.1%
| style="background: #00FF00" | 54.6%
| style="background: #CCFFCC" | 57.8%
| style="background: #FF9900" | 58.4%
|-
|align="left" style="background: #FFFF99" | Flexibility{{ref label|flex|B|B}}
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|style="background: #FFFFFF" |  
|-
|align="left" style="background: #FFFF99" | Error handling{{ref label|error|C|C}}
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Tagging
| style="background: #00FF00" | Vorbis tags
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | APEv2 (exp.)
| style="background: #00FF00" | ID3/APE
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | iTunes
| style="background: #CCFFCC" | ASF
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #00FF00" | very good
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #CCFFCC" | good
| style="background: #FF9900" | limited
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | LossyWAV
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FFFFFF" | sort of
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux Wine
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Mac
|}

''(table continued below)''

{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | Shorten
| width="95px" style="background: #00FFFF" | LA
| width="95px" style="background: #00FFFF" | TTA
| width="95px" style="background: #00FFFF" | MPEG-4 ALS
| width="95px" style="background: #00FFFF" | MPEG-4 SLS
| width="95px" style="background: #00FFFF" | Real Lossless
|-
| align="left" style="background: #FFFF99" | Encoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
| style="background: #FF9900" | slow
| style="background: #FF9900" | slow
|-
| align="left" style="background: #FFFF99" | Decoding speed{{ref label|speed|A|A}}
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | very slow
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #00FF00" | very fast
|-
| align="left" style="background: #FFFF99" | Compression{{ref label|speed|A|A}}
| style="background: #FF9900" | 62.3%
| style="background: #00FF00" | 53.3%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | ?
| style="background: #CCFFCC" | ~56%
|-
| align="left" style="background: #FFFF99" | Flexibility{{ref label|flex|B|B}}
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|! style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Error handling{{ref label|error|C|C}}
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Tagging
| style="background: #FF9900" | no
| style="background: #CCFFCC" | ID3v1
| style="background: #CCFFCC" | ID3
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | proprietary
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #FF9900" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
|}

{|
|-
|{{note label|speed|A|A}} The Compression ratio is calculated with the division of compressed size by uncompressed size * 100. So, lower is better. Encoding speed, Decoding speed and Compression ratio are based on each encoder's default settings and are taken from the most recent lossless codec comparison mentioned at the [[Lossless_comparison#Other_lossless_compressions_comparisons|links section of this page]]. Encoding speed is very fast if > 150x, fast if >75x, average if >40x, slow if >20x, very slow if <20x. Decoding speed is similar but thresholds are doubled, i.e., very fast if >300x, fast if >150x etc. Thresholds for compression are at 56% and 58%
|-
|{{note label|flex|B|B}} Flexibility refers to the amount of encoding choices offered to the users (Fast/low compression, Slow/high compression and everything inbetween)
|-
|{{note label|error|C|C}} Error handling means that a codec can detect a corruption in a file and warn the user about it, but still decode most of the file, only leaving a small gap of silence where the error was detected. Corruption in this sense means bits that are flipped, not removed
|}

== Codecs ==

These are the most popular lossless codecs, in alphabetical order:

=== Apple Lossless Audio Codec (ALAC) ===
http://www.apple.com/itunes/import.html

[[ALAC]] is a codec developed by Apple for usage in [[Apple iPod|iPod]] and AirPort Express.

'''ALAC pros'''
* Fast encoding
* Fast decoding
* [[Open source]] (encoding and decoding via FFmpeg and [[CueTools|CUETools]], decoding only via [http://craz.net/programs/itunes/alac.html a standalone decoder])
* Hardware support ([[Apple iPod|iPod]], AirPort Express)
* Software support (iTunes, Quicktime)
* Streaming support
* Tagging support (QT tags)
* Supports [[multichannel]] audio and [[high resolution]]s
* Used by a few online stores

''' ALAC cons '''
* Limited software support
* No error detection/robustness
* No hybrid/lossy mode
* Not very efficient

''' ALAC Other features '''
* Fits in the [[MP4]] container

=== Free Lossless Audio Codec (FLAC) ===
https://xiph.org/flac/

[[FLAC]] is a lossless codec developed by Josh Coalson. It's part of the Xiph multimedia portfolio, along with [[Ogg]], [[Vorbis]], [[Speex]] and [[Theora]].

''' FLAC pros '''
* [[Open source]]
* Very fast decoding
* Very fast encoding
* Very good hardware support (Android, Marantz, Sonos, [http://xiph.org/flac/links.html many others])
* Very good software support
* Error robustness
* Streaming support
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support (FLAC tags)
* Supports [[RIFF]] chunks
* Pipe support
* [[ReplayGain]] compatible
* Used by a few [http://xiph.org/flac/links.html#music online stores]

''' FLAC cons '''
* No hybrid/lossy mode

''' FLAC Other features '''
* Supports embedded CUE sheets (with [http://flac.sourceforge.net/faq.html#general__no_cuesheet_tags limitations])
* Includes MD5 hashes for quick integrity checking as standard
* Fits the [[Ogg]] and [[Matroska]] containers

=== LosslessAudio (LA) ===
http://www.lossless-audio.com/

[[LA]] is a lossless codec developed by Michael Bevin.

''' LA pros '''
* Very high compression
* Tagging support ([[ID3v1]])
* Supports [[RIFF]] chunks
* Pipe support

''' LA cons '''
* Closed source
* Very slow encoding and decoding
* Doesn't support [[multichannel]] audio and [[high resolution]]s
* No hardware support
* No hybrid/lossy mode
* Bad software support
* Doesn't support [[ReplayGain]]
* No updates since 2004

'''''It's important to mention that the LA foobar plugin is buggy and doesn't produce lossless streams!'''''

=== Monkey's Audio (APE) ===
http://www.monkeysaudio.com/

[[Monkey's Audio]] is a very efficient lossless compressor developed by Matt Ashland.

''' APE pros '''
* High compression
* Fast encoding
* Good software support
* Simple and user friendly. Official GUI provided.
* Java version (multiplatform)
* Tagging support ([[ID3v1]], [[APE tags]])
* [[High resolution]] audio support
* Supports [[RIFF]] chunks (only in the GUI encoder)
* Pipe support (only in a [http://www.etree.org/shnutils/shntool/ special] version)

''' APE cons '''
* Problematic license (source provided, no modification or redistribution rights)
* Slow decoding
* No [[multichannel]] support
* No error robustness
* No hybrid/lossy mode
* Limited hardware support (Rockbox, some Cowon players); poor battery life due to complicated decoding (see [http://www.rockbox.org/wiki/SoundCodecMonkeysAudio MP3 player benchmarks])
* Higher compression levels are extremely CPU intensive
* Doesn't support [[ReplayGain]]

''' APE Other features '''
* Includes MD5 hashes for quick integrity checking
* Supports APL image link files (similar to CUE sheets)

=== MPEG-4 SLS ===
MPEG-4 SLS allows audio encoding from lossless scalable to [[AAC]].

''' SLS pros '''
* Transcoding to standard AAC or any higher lossy bitrate at the speed of copying a file
* Scalable decoding from lossless, to any bitrate down to the AAC core track
* Best lossless compression available when you don't count the AAC track (~5% gain over any other lossless compression + AAC)
* [[High resolution]] audio support
* Multi channel audio support
* [[Open source]] (MPEG-4 Reference code)
* Embedded in standard MP4 files, so supports same tagging and ReplayGain features as AAC does.

''' SLS cons '''
* No usable software available yet
* Pure lossless compression not the best there is
* Seems to be slow in encoding and decoding, but we have to wait for released software
* No news or developments in last few years

''' SLS Other features '''
* Transform based lossless codec with optional LC AAC core track

=== OptimFROG (OFR) ===
http://www.losslessaudio.org/

[[OptimFROG]] is a lossless format developed by Florin Ghido to become the champion in audio compression.

''' OFR pros '''
* Very high compression
* Good software support
* Error robustness
* Streaming support
* Supports [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3]], [[APE tags]])
* Supports [[RIFF]] chunks
* [[ReplayGain]] compatible

''' OFR cons '''
* Closed source
* No [[multichannel]] audio support
* No hardware support
* Very slow decoding
* Slow encoding
* No updates since 2011 (last non-Windows release in 2006)

''' OFR Other features '''
* Supports 32bit float streams
* Includes MD5 hashes for quick integrity checking

=== RealAudio Lossless (RAL) ===
http://www.realnetworks.com/products/codecs/realaudio.html

RealAudio lossless is the lossless codec developed by Real Networks for their multimedia portfolio

''' RAL pros '''
* Very fast decoding
* Streaming support
* Tagging support (proprietary)

''' RAL cons '''
* Closed source
* Slow encoding
* No [[multichannel]] and [[high resolution]] audio support
* Little software support (Real Player)
* No hardware support
* No hybrid/lossy mode
* No pipe support
* Doesn't support [[ReplayGain]]

=== Shorten (SHN) ===
http://www.etree.org/shnutils/shorten/

[[Shorten]] is a very old and featureless lossless codec developed by Tony Robinson at SoftSound.

''' SHN pros '''
* [[Open source]]
* Fast decoding
* Very fast encoding
* Good software support
* Supports [[RIFF]] chunks
* Pipe support

''' SHN cons '''
* Quite inefficient
* No [[multichannel]] or [[high resolution]] audio support
* No hybrid/lossy mode
* No error robustness
* Not streamable
* No hardware support
* No native tagging
* Doesn't support [[ReplayGain]]
* No news or developments since 2007

=== Tom's verlustfreier Audiokompressor (TAK) ===
http://www.thbeck.de/Tak/Tak.html

[[TAK]] is a lossless codec developed by TBeck.

''' TAK pros '''
* Very fast decoding
* Very fast encoding
* Very high efficiency
* Error robust
* Supports multichannel audio and high resolutions
* Tagging support
* ReplayGain compatible
* Supports RIFF chunks
* Pipe support
* Streamable

''' TAK cons '''
* Closed source
* No hybrid/lossy mode
* No hardware support
* Average software support
* Doesn't support Unicode (yet)

''' TAK Other features '''
* Optional MD5 checksum

=== True Audio (TTA) ===
http://www.true-audio.com/

[[TTA]] is a lossless codec developed by a team of russian programmers.

''' TTA pros '''
* [[Open source]]
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support ([[ID3]])
* [[ReplayGain]] compatible
* Error robustness
* Average compression and decoding speed
* Fast encoding

''' TTA cons '''
* No streaming support
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* No pipe support
* No update since 2007
* Limited hardware support

''' TTA Other features '''
* Fits the [[Matroska]] container

=== WavPack (WV) ===
http://www.wavpack.com/

[[WavPack]] is a fast and featureful lossless codec developed by David Bryant.

''' WV pros '''
* [[Open source]]
* Fast decoding
* Very fast encoding
* Good efficiency
* Error robustness
* Streaming support
* Hardware support ([http://www.rockbox.org/ RockBox])
* Supports [[multichannel]] audio and [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3v1]], [[APE tags]])
* Supports [[RIFF]] chunks
* Ability to create self extracting files for Win32 platform
* Pipe support
* Good software support
* [[ReplayGain]] compatible

''' WV cons '''
* Limited hardware player support

''' WV Other features '''
* Supports 32bit float streams
* Supports embedded CUE sheets
* Includes MD5 hashes for quick integrity checking
* Can encode in both symmetrical and asymmetrical modes.
* Fits the [[Matroska]] container

=== Windows Media Audio Lossless (WMAL) ===
http://www.microsoft.com/windows/windowsmedia/9series/codecs/audio.aspx

WMA Lossless is the lossless codec developed by Microsoft to be featured in their Windows Media codec portfolio.

''' WMAL pros '''
* Streaming support
* Very good software support
* Hardware support (Microsoft Zune, [http://en.wikipedia.org/wiki/Gigabeat Gigabeat V and S line from Toshiba])
* Supports [[multichannel]] audio and [[high resolution]]s.
* Tagging support (proprietary)
* Pipe support

''' WMAL cons '''
* Rather low efficiency
* Closed source
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* Doesn't support [[ReplayGain]]

''' WMAL Other features '''
* Fits the [[ASF]] container

=== Oddball Formats ===
There are several old lossless formats that aren't being featured in the article above. Reasons are: lack of widespread support, lack of features, bad efficiency and, most importantly, it seems no one is really interested in them.

Most of those would have disappeared by now, but some of them are being preserved for posterity at [[User:Rjamorim|rjamorim]]'s

* Advanced Digital Audio (ADA)
* Bonk
* Marian's a-Pac
* AudioZip
* Dakx WAV
* Entis Lab MIO
* LiteWave
* LPAC
* Pegasus SPS
* RK Audio (RKAU)
* Ogg Squish
* Sonarc
* VocPack
* WavArc
* WaveZip/MUSICompress

== See also ==
* [[Lossless]]

== External links ==
''' Other lossless compressions comparisons '''
''Sorted based on last '''update''' date.''

* [http://www.icer.nl/losslesstest/ Martijn van Beurden's comparison] - tries to compare all codecs and settings with a balanced pool of music (last updated 2013-08-10)
* [http://synthetic-soul.co.uk/comparison/lossless/ Synthetic Soul's comparison] (last update 2007-07-28)
* <s>Johan De Bock's speed oriented comparison</s> - best choices speedwise are indicated in green, mostly electronic music (last updated 2006-07-22)
* <s>Hans Heijden's</s> -- used as reference to build the table (last updated 2006-07-07)
* [http://synthetic-soul.co.uk/comparison/josef/ Josef Pohm's comparison, hosted by Synthetic Soul] (last update 2006-05-29)
* [http://www.bobulous.org.uk/misc/lossless_audio_2006.html Bobulous' lossless audio comparison] — a look at six lossless formats in terms of speed and file size (last updated 2006-05-22)
* <s>Jhan De Bock's size oriented comparison</s> - aimed only at the maximum compression setting for each codec (based on a somewhat limited set of samples, however) (last updated 2006-05-19)
* <s>Gruboolez'</s> -- comparing only classical music (last updated 2005-02-27)
* [http://members.home.nl/w.speek/comparison.htm Speek's] (last updated 2005-02-07)

''' More on lossless compressions '''
* [http://web.archive.org/web/20080731103800/http://www.losslessaudioblog.com/ The Lossless Audio Blog], retrieved from archive.org - by windmiller, is a reliable and complete source of news about lossless compression.
* Go to the [http://www.hydrogenaudio.org/forums/index.php?showtopic=33226 Hydrogenaudio thread] to discuss this article.

[[Category:Guides]]

Lossless comparison

2014-04-02T20:11:33Z

94.209.155.125: Updated lists to conform to table, removed Apple-specific references (that's really part of hardware/software support)

The '''lossless comparison page''' aims to gather information about lossless codecs available so users can make an informed decision as to what lossless codec to choose for their needs.

== Introduction ==
Given the enormous amount of [[lossless]] audio compressor choices available, it is a very difficult task to choose the one most suited for each person's needs. Some people only take into consideration compression performance when choosing a codec, but as the following table and article shows, there are several other features worth taking into consideration when making a choice.

For example, users wanting good multiplatform compatibility and robustness (e.g., people sharing live recordings) would favour [[WavPack]] or [[FLAC]]. Another user, looking for the very highest compression available, would go with [[OptimFROG]]. Someone wanting portable support would use [[FLAC]] or [[ALAC]], and so on. En fin, this is not a matter worth getting too worked up about. If you later find out the codec you chose isn't the best for your needs, you can just transcompress to another format, without risk of losing quality.

'''Note:''' for latest comparison of lossless compression, scroll down to the [[Lossless comparison#External links|Links section of this page]].

== Comparison Table ==


{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | FLAC
| width="95px" style="background: #00FFFF" | WavPack
| width="95px" style="background: #00FFFF" | TAK
| width="95px" style="background: #00FFFF" | Monkey's
| width="95px" style="background: #00FFFF" | OptimFROG
| width="95px" style="background: #00FFFF" | ALAC
| width="95px" style="background: #00FFFF" | WMA
|-
|align="left" style="background: #FFFF99" | Encoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #CCFFCC" | fast
| style="background: #CCFFCC" | fast
|-
|align="left" style="background: #FFFF99" | Decoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #00FF00" | very fast
| style="background: #FF9900" | slow
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
|-
|align="left" style="background: #FFFF99" | Compression{{ref label|speed|A|A}}
| style="background: #CCFFCC" | 57.0%
| style="background: #CCFFCC" | 57.1%
| style="background: #00FF00" | 56.0%
| style="background: #00FF00" | 55.1%
| style="background: #00FF00" | 54.6%
| style="background: #CCFFCC" | 57.8%
| style="background: #FF9900" | 58.4%
|-
|align="left" style="background: #FFFF99" | Flexibility{{ref label|flex|B|B}}
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|style="background: #FFFFFF" |  
|-
|align="left" style="background: #FFFF99" | Error handling{{ref label|error|C|C}}
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Tagging
| style="background: #00FF00" | Vorbis tags
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | APEv2 (exp.)
| style="background: #00FF00" | ID3/APE
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | iTunes
| style="background: #CCFFCC" | ASF
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #00FF00" | very good
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #CCFFCC" | good
| style="background: #FF9900" | limited
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | LossyWAV
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FFFFFF" | sort of
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux Wine
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Mac
|}

''(table continued below)''

{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | Shorten
| width="95px" style="background: #00FFFF" | LA
| width="95px" style="background: #00FFFF" | TTA
| width="95px" style="background: #00FFFF" | MPEG-4 ALS
| width="95px" style="background: #00FFFF" | MPEG-4 SLS
| width="95px" style="background: #00FFFF" | Real Lossless
|-
| align="left" style="background: #FFFF99" | Encoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
| style="background: #FF9900" | slow
| style="background: #FF9900" | slow
|-
| align="left" style="background: #FFFF99" | Decoding speed{{ref label|speed|A|A}}
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | very slow
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #00FF00" | very fast
|-
| align="left" style="background: #FFFF99" | Compression{{ref label|speed|A|A}}
| style="background: #FF9900" | 62.3%
| style="background: #00FF00" | 53.3%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | ?
| style="background: #CCFFCC" | ~56%
|-
| align="left" style="background: #FFFF99" | Flexibility{{ref label|flex|B|B}}
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|! style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Error handling{{ref label|error|C|C}}
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Tagging
| style="background: #FF9900" | no
| style="background: #CCFFCC" | ID3v1
| style="background: #CCFFCC" | ID3
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | proprietary
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #FF9900" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
|}

{|
|-
|{{note label|speed|A|A}} The Compression ratio is calculated with the division of compressed size by uncompressed size * 100. So, lower is better. Encoding speed, Decoding speed and Compression ratio are based on each encoder's default settings and are taken from the most recent lossless codec comparison mentioned at the [[Lossless_comparison#Other_lossless_compressions_comparisons|links section of this page]]. Encoding speed is very fast if > 150x, fast if >75x, average if >40x, slow if >20x, very slow if <20x. Decoding speed is similar but thresholds are doubled, i.e., very fast if >300x, fast if >150x etc. Thresholds for compression are at 56% and 58%
|-
|{{note label|flex|B|B}} Flexibility refers to the amount of encoding choices offered to the users (Fast/low compression, Slow/high compression and everything inbetween)
|-
|{{note label|error|C|C}} Error handling means that a codec can detect a corruption in a file and warn the user about it, but still decode most of the file, only leaving a small gap of silence where the error was detected. Corruption in this sense means bits that are flipped, not removed
|}

== Codecs ==

These are the most popular lossless codecs, in alphabetical order:

=== Apple Lossless Audio Codec (ALAC) ===
http://www.apple.com/itunes/import.html

[[ALAC]] is a codec developed by Apple for usage in [[Apple iPod|iPod]] and AirPort Express.

'''ALAC pros'''
* Fast encoding
* Fast decoding
* [[Open source]] (encoding and decoding via FFmpeg and [[CueTools|CUETools]], decoding only via [http://craz.net/programs/itunes/alac.html a standalone decoder])
* Hardware support ([[Apple iPod|iPod]], AirPort Express)
* Software support (iTunes, Quicktime)
* Streaming support
* Tagging support (QT tags)
* Supports [[multichannel]] audio and [[high resolution]]s
* Used by a few online stores

''' ALAC cons '''
* Limited software support
* No error detection/robustness
* No hybrid/lossy mode
* Not very efficient

''' ALAC Other features '''
* Fits in the [[MP4]] container

=== Free Lossless Audio Codec (FLAC) ===
https://xiph.org/flac/

[[FLAC]] is a lossless codec developed by Josh Coalson. It's part of the Xiph multimedia portfolio, along with [[Ogg]], [[Vorbis]], [[Speex]] and [[Theora]].

''' FLAC pros '''
* [[Open source]]
* Very fast decoding
* Very fast encoding
* Very good hardware support (Android, Marantz, Sonos, [http://xiph.org/flac/links.html many others])
* Very good software support
* Error robustness
* Streaming support
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support (FLAC tags)
* Supports [[RIFF]] chunks
* Pipe support
* [[ReplayGain]] compatible
* Used by a few [http://xiph.org/flac/links.html#music online stores]

''' FLAC cons '''
* No hybrid/lossy mode

''' FLAC Other features '''
* Supports embedded CUE sheets (with [http://flac.sourceforge.net/faq.html#general__no_cuesheet_tags limitations])
* Includes MD5 hashes for quick integrity checking as standard
* Fits the [[Ogg]] and [[Matroska]] containers

=== LosslessAudio (LA) ===
http://www.lossless-audio.com/

[[LA]] is a lossless codec developed by Michael Bevin.

''' LA pros '''
* Very high compression
* Tagging support ([[ID3v1]])
* Supports [[RIFF]] chunks
* Pipe support

''' LA cons '''
* Closed source
* Very slow encoding and decoding
* Doesn't support [[multichannel]] audio and [[high resolution]]s
* No hardware support
* No hybrid/lossy mode
* Bad software support
* Doesn't support [[ReplayGain]]
* No updates since 2004

'''''It's important to mention that the LA foobar plugin is buggy and doesn't produce lossless streams!'''''

=== Monkey's Audio (APE) ===
http://www.monkeysaudio.com/

[[Monkey's Audio]] is a very efficient lossless compressor developed by Matt Ashland.

''' APE pros '''
* High compression
* Fast encoding
* Good software support
* Simple and user friendly. Official GUI provided.
* Java version (multiplatform)
* Tagging support ([[ID3v1]], [[APE tags]])
* [[High resolution]] audio support
* Supports [[RIFF]] chunks (only in the GUI encoder)
* Pipe support (only in a [http://www.etree.org/shnutils/shntool/ special] version)

''' APE cons '''
* Problematic license (source provided, no modification or redistribution rights)
* Slow decoding
* No [[multichannel]] support
* No error robustness
* No hybrid/lossy mode
* Limited hardware support (Rockbox, some Cowon players); poor battery life due to complicated decoding (see [http://www.rockbox.org/wiki/SoundCodecMonkeysAudio MP3 player benchmarks])
* Higher compression levels are extremely CPU intensive
* Doesn't support [[ReplayGain]]

''' APE Other features '''
* Includes MD5 hashes for quick integrity checking
* Supports APL image link files (similar to CUE sheets)

=== MPEG-4 SLS ===
MPEG-4 SLS allows audio encoding from lossless scalable to [[AAC]].

''' SLS pros '''
* Transcoding to standard AAC or any higher lossy bitrate at the speed of copying a file
* Scalable decoding from lossless, to any bitrate down to the AAC core track
* Best lossless compression available when you don't count the AAC track (~5% gain over any other lossless compression + AAC)
* [[High resolution]] audio support
* Multi channel audio support
* [[Open source]] (MPEG-4 Reference code)
* Embedded in standard MP4 files, so supports same tagging and ReplayGain features as AAC does.

''' SLS cons '''
* No usable software available yet
* Pure lossless compression not the best there is
* Seems to be slow in encoding and decoding, but we have to wait for released software
* No news or developments in last few years

''' SLS Other features '''
* Transform based lossless codec with optional LC AAC core track

=== OptimFROG (OFR) ===
http://www.losslessaudio.org/

[[OptimFROG]] is a lossless format developed by Florin Ghido to become the champion in audio compression.

''' OFR pros '''
* Very high compression
* Good software support
* Error robustness
* Streaming support
* Supports [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3]], [[APE tags]])
* Supports [[RIFF]] chunks
* [[ReplayGain]] compatible

''' OFR cons '''
* Closed source
* No [[multichannel]] audio support
* No hardware support
* Very slow decoding
* Slow encoding
* No updates since 2011 (last non-Windows release in 2006)

''' OFR Other features '''
* Supports 32bit float streams
* Includes MD5 hashes for quick integrity checking

=== RealAudio Lossless (RAL) ===
http://www.realnetworks.com/products/codecs/realaudio.html

RealAudio lossless is the lossless codec developed by Real Networks for their multimedia portfolio

''' RAL pros '''
* Very fast decoding
* Streaming support
* Tagging support (proprietary)

''' RAL cons '''
* Closed source
* Slow encoding
* No [[multichannel]] and [[high resolution]] audio support
* Little software support (Real Player)
* No hardware support
* No hybrid/lossy mode
* No pipe support
* Doesn't support [[ReplayGain]]

=== Shorten (SHN) ===
http://www.etree.org/shnutils/shorten/

[[Shorten]] is a very old and featureless lossless codec developed by Tony Robinson at SoftSound.

''' SHN pros '''
* [[Open source]]
* Fast decoding
* Very fast encoding
* Good software support
* Supports [[RIFF]] chunks
* Pipe support

''' SHN cons '''
* Quite inefficient
* No [[multichannel]] or [[high resolution]] audio support
* No hybrid/lossy mode
* No error robustness
* Not streamable
* No hardware support
* No native tagging
* Doesn't support [[ReplayGain]]
* No news or developments since 2007

=== True Audio (TTA) ===
http://www.true-audio.com/

[[TTA]] is a new lossless codec developed by a team of russian programmers.

''' TTA pros '''
* [[Open source]]
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support ([[ID3]])
* [[ReplayGain]] compatible
* Error robustness
* Average compression and decoding speed
* Fast encoding

''' TTA cons '''
* No streaming support
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* No pipe support
* No update since 2007
* Limited hardware support

''' TTA Other features '''
* Fits the [[Matroska]] container

=== WavPack (WV) ===
http://www.wavpack.com/

[[WavPack]] is a fast and featureful lossless codec developed by David Bryant.

''' WV pros '''
* [[Open source]]
* Fast decoding
* Very fast encoding
* Good efficiency
* Error robustness
* Streaming support
* Hardware support ([http://www.rockbox.org/ RockBox])
* Supports [[multichannel]] audio and [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3v1]], [[APE tags]])
* Supports [[RIFF]] chunks
* Ability to create self extracting files for Win32 platform
* Pipe support
* Good software support
* [[ReplayGain]] compatible

''' WV cons '''
* Limited hardware player support

''' WV Other features '''
* Supports 32bit float streams
* Supports embedded CUE sheets
* Includes MD5 hashes for quick integrity checking
* Can encode in both symmetrical and asymmetrical modes.
* Fits the [[Matroska]] container

=== Windows Media Audio Lossless (WMAL) ===
http://www.microsoft.com/windows/windowsmedia/9series/codecs/audio.aspx

WMA Lossless is the lossless codec developed by Microsoft to be featured in their Windows Media codec portfolio.

''' WMAL pros '''
* Streaming support
* Very good software support
* Hardware support (Microsoft Zune, [http://en.wikipedia.org/wiki/Gigabeat Gigabeat V and S line from Toshiba])
* Supports [[multichannel]] audio and [[high resolution]]s.
* Tagging support (proprietary)
* Pipe support

''' WMAL cons '''
* Rather low efficiency
* Closed source
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* Doesn't support [[ReplayGain]]

''' WMAL Other features '''
* Fits the [[ASF]] container

=== Oddball Formats ===
There are several old lossless formats that aren't being featured in the article above. Reasons are: lack of widespread support, lack of features, bad efficiency and, most importantly, it seems no one is really interested in them.

Most of those would have disappeared by now, but some of them are being preserved for posterity at [[User:Rjamorim|rjamorim]]'s

* Advanced Digital Audio (ADA)
* Bonk
* Marian's a-Pac
* AudioZip
* Dakx WAV
* Entis Lab MIO
* LiteWave
* LPAC
* Pegasus SPS
* RK Audio (RKAU)
* Ogg Squish
* Sonarc
* VocPack
* WavArc
* WaveZip/MUSICompress

== See also ==
* [[Lossless]]

== External links ==
''' Other lossless compressions comparisons '''
''Sorted based on last '''update''' date.''

* [http://www.icer.nl/losslesstest/ Martijn van Beurden's comparison] - tries to compare all codecs and settings with a balanced pool of music (last updated 2013-08-10)
* [http://synthetic-soul.co.uk/comparison/lossless/ Synthetic Soul's comparison] (last update 2007-07-28)
* <s>Johan De Bock's speed oriented comparison</s> - best choices speedwise are indicated in green, mostly electronic music (last updated 2006-07-22)
* <s>Hans Heijden's</s> -- used as reference to build the table (last updated 2006-07-07)
* [http://synthetic-soul.co.uk/comparison/josef/ Josef Pohm's comparison, hosted by Synthetic Soul] (last update 2006-05-29)
* [http://www.bobulous.org.uk/misc/lossless_audio_2006.html Bobulous' lossless audio comparison] — a look at six lossless formats in terms of speed and file size (last updated 2006-05-22)
* <s>Jhan De Bock's size oriented comparison</s> - aimed only at the maximum compression setting for each codec (based on a somewhat limited set of samples, however) (last updated 2006-05-19)
* <s>Gruboolez'</s> -- comparing only classical music (last updated 2005-02-27)
* [http://members.home.nl/w.speek/comparison.htm Speek's] (last updated 2005-02-07)

''' More on lossless compressions '''
* [http://web.archive.org/web/20080731103800/http://www.losslessaudioblog.com/ The Lossless Audio Blog], retrieved from archive.org - by windmiller, is a reliable and complete source of news about lossless compression.
* Go to the [http://www.hydrogenaudio.org/forums/index.php?showtopic=33226 Hydrogenaudio thread] to discuss this article.

[[Category:Guides]]

Lossless comparison

2014-04-02T19:40:39Z

94.209.155.125: Changed headings so TOC is much more readable. Changed introduction too

The '''lossless comparison page''' aims to gather information about lossless codecs available so users can make an informed decision as to what lossless codec to choose for their needs.

== Introduction ==
Given the enormous amount of [[lossless]] audio compressor choices available, it is a very difficult task to choose the one most suited for each person's needs. Some people only take into consideration compression performance when choosing a codec, but as the following table and article shows, there are several other features worth taking into consideration when making a choice.

For example, users wanting good multiplatform compatibility and robustness (e.g., people sharing live recordings) would favour [[WavPack]] or [[FLAC]]. Another user, looking for the very highest compression available, would go with [[OptimFROG]]. Someone wanting portable support would use [[FLAC]] or [[ALAC]], and so on. En fin, this is not a matter worth getting too worked up about. If you later find out the codec you chose isn't the best for your needs, you can just transcompress to another format, without risk of losing quality.

'''Note:''' for latest comparison of lossless compression, scroll down to the [[Lossless comparison#External links|Links section of this page]].

== Comparison Table ==


{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | FLAC
| width="95px" style="background: #00FFFF" | WavPack
| width="95px" style="background: #00FFFF" | TAK
| width="95px" style="background: #00FFFF" | Monkey's
| width="95px" style="background: #00FFFF" | OptimFROG
| width="95px" style="background: #00FFFF" | ALAC
| width="95px" style="background: #00FFFF" | WMA
|-
|align="left" style="background: #FFFF99" | Encoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #CCFFCC" | fast
| style="background: #CCFFCC" | fast
|-
|align="left" style="background: #FFFF99" | Decoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #00FF00" | very fast
| style="background: #FF9900" | slow
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
|-
|align="left" style="background: #FFFF99" | Compression{{ref label|speed|A|A}}
| style="background: #CCFFCC" | 57.0%
| style="background: #CCFFCC" | 57.1%
| style="background: #00FF00" | 56.0%
| style="background: #00FF00" | 55.1%
| style="background: #00FF00" | 54.6%
| style="background: #CCFFCC" | 57.8%
| style="background: #FF9900" | 58.4%
|-
|align="left" style="background: #FFFF99" | Flexibility{{ref label|flex|B|B}}
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|style="background: #FFFFFF" |  
|-
|align="left" style="background: #FFFF99" | Error handling{{ref label|error|C|C}}
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Tagging
| style="background: #00FF00" | Vorbis tags
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | APEv2 (exp.)
| style="background: #00FF00" | ID3/APE
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | iTunes
| style="background: #CCFFCC" | ASF
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #00FF00" | very good
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #CCFFCC" | good
| style="background: #FF9900" | limited
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | LossyWAV
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FFFFFF" | sort of
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux Wine
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Mac
|}

''(table continued below)''

{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | Shorten
| width="95px" style="background: #00FFFF" | LA
| width="95px" style="background: #00FFFF" | TTA
| width="95px" style="background: #00FFFF" | MPEG-4 ALS
| width="95px" style="background: #00FFFF" | MPEG-4 SLS
| width="95px" style="background: #00FFFF" | Real Lossless
|-
| align="left" style="background: #FFFF99" | Encoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
| style="background: #FF9900" | slow
| style="background: #FF9900" | slow
|-
| align="left" style="background: #FFFF99" | Decoding speed{{ref label|speed|A|A}}
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | very slow
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #00FF00" | very fast
|-
| align="left" style="background: #FFFF99" | Compression{{ref label|speed|A|A}}
| style="background: #FF9900" | 62.3%
| style="background: #00FF00" | 53.3%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | ?
| style="background: #CCFFCC" | ~56%
|-
| align="left" style="background: #FFFF99" | Flexibility{{ref label|flex|B|B}}
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|! style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Error handling{{ref label|error|C|C}}
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Tagging
| style="background: #FF9900" | no
| style="background: #CCFFCC" | ID3v1
| style="background: #CCFFCC" | ID3
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | proprietary
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #FF9900" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
|}

{|
|-
|{{note label|speed|A|A}} The Compression ratio is calculated with the division of compressed size by uncompressed size * 100. So, lower is better. Encoding speed, Decoding speed and Compression ratio are based on each encoder's default settings and are taken from the most recent lossless codec comparison mentioned at the [[Lossless_comparison#Other_lossless_compressions_comparisons|links section of this page]]. Encoding speed is very fast if > 150x, fast if >75x, average if >40x, slow if >20x, very slow if <20x. Decoding speed is similar but thresholds are doubled, i.e., very fast if >300x, fast if >150x etc. Thresholds for compression are at 56% and 58%
|-
|{{note label|flex|B|B}} Flexibility refers to the amount of encoding choices offered to the users (Fast/low compression, Slow/high compression and everything inbetween)
|-
|{{note label|error|C|C}} Error handling means that a codec can detect a corruption in a file and warn the user about it, but still decode most of the file, only leaving a small gap of silence where the error was detected. Corruption in this sense means bits that are flipped, not removed
|}

== Codecs ==

These are the most popular lossless codecs, in alphabetical order:

=== Apple Lossless Audio Codec (ALAC) ===
http://www.apple.com/itunes/import.html

[[ALAC]] is a codec developed by Apple for usage in [[Apple iPod|iPod]] and AirPort Express.

'''ALAC pros'''
* Very fast decoding
* [[Open source]] (encoding and decoding via FFmpeg and [[CueTools|CUETools]], decoding only via [http://craz.net/programs/itunes/alac.html a standalone decoder])
* Hardware support ([[Apple iPod|iPod]], AirPort Express)
* Streaming support
* Tagging support (QT tags)
* Excellent hardware-software-lossy format integration with [[iTunes]]/iPod.
* Supports [[multichannel]] audio and [[high resolution]]s

''' ALAC cons '''
* Limited software support
* No error detection/robustness
* No hybrid/lossy mode

''' ALAC Other features '''
* Fits in the [[MP4]] container
* Can be used with the AirPort Express gadget

=== Free Lossless Audio Codec (FLAC) ===
https://xiph.org/flac/

[[FLAC]] is a lossless codec developed by Josh Coalson. It's part of the Xiph multimedia portfolio, along with [[Ogg]], [[Vorbis]], [[Speex]] and [[Theora]].

''' FLAC pros '''
* [[Open source]]
* Very fast decoding
* Fast encoding
* Hardware support ([[Rio Karma|Karma]], Phatbox, etc.)
* Very good software support
* Error robustness
* Streaming support
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support (FLAC tags)
* Supports [[RIFF]] chunks
* Pipe support
* [[ReplayGain]] compatible

''' FLAC cons '''
* No hybrid/lossy mode
* No support in iTunes (or other Apple products)

''' FLAC Other features '''
* Supports embedded CUE sheets (with [http://flac.sourceforge.net/faq.html#general__no_cuesheet_tags limitations])
* Includes MD5 hashes for quick integrity checking
* Fits the [[Ogg]] and [[Matroska]] containers

=== LosslessAudio (LA) ===
http://www.lossless-audio.com/

[[LA]] is a lossless codec developed by Michael Bevin.

''' LA pros '''
* Very high compression
* Tagging support ([[ID3v1]])
* Supports [[RIFF]] chunks
* Pipe support

''' LA cons '''
* Closed source
* Very slow encoding and decoding
* Doesn't support [[multichannel]] audio and [[high resolution]]s
* No hardware support
* No hybrid/lossy mode
* Bad software support
* Doesn't support [[ReplayGain]]

'''''It's important to mention that the LA foobar plugin is buggy and doesn't produce lossless streams!'''''

=== Monkey's Audio (APE) ===
http://www.monkeysaudio.com/

[[Monkey's Audio]] is a very efficient lossless compressor developed by Matt Ashland.

''' APE pros '''
* High efficiency
* Good software support
* Simple and user friendly. Official GUI provided.
* Java version (multiplatform)
* Tagging support ([[ID3v1]], [[APE tags]])
* [[High resolution]] audio support
* Supports [[RIFF]] chunks (only in the GUI encoder)
* Pipe support (only in a [http://www.etree.org/shnutils/shntool/ special] version)

''' APE cons '''
* Problematic license (source provided, no modification or redistribution rights)
* No [[multichannel]] support
* No error robustness
* No hybrid/lossy mode
* Limited hardware support (Rockbox, some Cowon players); poor battery life due to complicated decoding [http://www.rockbox.org/wiki/SoundCodecMonkeysAudio MP3 player benchmarks]
* Higher compression levels are extremely CPU intensive
* Doesn't support [[ReplayGain]]

''' APE Other features '''
* Includes MD5 hashes for quick integrity checking
* Supports APL image link files (similar to CUE sheets)

=== MPEG-4 SLS ===
MPEG-4 SLS allows audio encoding from lossless scalable to [[AAC]].

''' SLS pros '''
* Transcoding to standard AAC or any higher lossy bitrate at the speed of copying a file
* Scalable decoding from lossless, to any bitrate down to the AAC core track
* Best lossless compression available when you count the AAC track (~5% gain over any other lossless compression + AAC)
* [[High resolution]] audio support
* Multi channel audio support
* [[Open source]] (MPEG-4 Reference code)
* Embedded in standard MP4 files, so supports same tagging and ReplayGain features as AAC does.

''' SLS cons '''
* No usable software available yet
* Pure lossless compression not the best there is
* Seems to be slow in encoding and decoding, but we have to wait for released software

''' SLS Other features '''
* Transform based lossless codec with optional LC AAC core track

=== OptimFROG (OFR) ===
http://www.losslessaudio.org/

[[OptimFROG]] is a lossless format developed by Florin Ghido to become the champion in audio compression.

''' OFR pros '''
* Very high compression
* Good software support
* Error robustness
* Streaming support
* Supports [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3]], [[APE tags]])
* Supports [[RIFF]] chunks
* [[ReplayGain]] compatible

''' OFR cons '''
* Closed source
* No [[multichannel]] audio support
* No hardware support
* Quite slow decoding

''' OFR Other features '''
* Supports 32bit float streams
* Includes MD5 hashes for quick integrity checking

=== RealAudio Lossless (RAL) ===
http://www.realnetworks.com/products/codecs/realaudio.html

RealAudio lossless is the lossless codec developed by Real Networks for their multimedia portfolio

''' RAL pros '''
* Very fast decoding
* Streaming support
* Tagging support (proprietary)

''' RAL cons '''
* Closed source
* No [[multichannel]] and [[high resolution]] audio support
* Little software support (Real Player)
* No hardware support
* Compression efficiency not on par with other lossless codecs
* No hybrid/lossy mode
* No pipe support
* Doesn't support [[ReplayGain]]

=== Shorten (SHN) ===
http://www.etree.org/shnutils/shorten/

[[Shorten]] is a very old and featureless lossless codec developed by Tony Robinson at SoftSound.

''' SHN pros '''
* [[Open source]]
* Fast decoding
* Very good software support
* Supports [[RIFF]] chunks
* Pipe support

''' SHN cons '''
* Quite inefficient
* No [[multichannel]] or [[high resolution]] audio support
* No hybrid/lossy mode
* No error robustness
* Not streamable
* No hardware support
* No native tagging
* Doesn't support [[ReplayGain]]

=== True Audio (TTA) ===
http://www.true-audio.com/

[[TTA]] is a new lossless codec developed by a team of russian programmers.

''' TTA pros '''
* [[Open source]]
* Good efficiency
* Hardware support (obscure DVD player)
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support ([[ID3]])
* [[ReplayGain]] compatible
* Error robustness

''' TTA cons '''
* No streaming support
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* No pipe support

''' TTA Other features '''
* Fits the [[Matroska]] container

=== WavPack (WV) ===
http://www.wavpack.com/

[[WavPack]] is a fast and featureful lossless codec developed by David Bryant.

''' WV pros '''
* [[Open source]]
* Very fast decoding
* Very fast encoding
* Good efficiency
* Error robustness
* Streaming support
* Hardware support ([http://www.rockbox.org/ RockBox])
* Supports [[multichannel]] audio and [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3v1]], [[APE tags]])
* Supports [[RIFF]] chunks
* Ability to create self extracting files for Win32 platform
* Pipe support
* Good software support
* [[ReplayGain]] compatible

''' WV cons '''
* Limited hardware player support

''' WV Other features '''
* Supports 32bit float streams
* Supports embedded CUE sheets
* Includes MD5 hashes for quick integrity checking
* Can encode in both symmetrical and asymmetrical modes.
* Fits the [[Matroska]] container

=== Windows Media Audio Lossless (WMAL) ===
http://www.microsoft.com/windows/windowsmedia/9series/codecs/audio.aspx

WMA Lossless is the lossless codec developed by Microsoft to be featured in their Windows Media codec portfolio.

''' WMAL pros '''
* Streaming support
* Very good software support
* Hardware support (All Microsoft Zunes though older models may need firmware updates, also supported by some non-Microsoft devices like the [http://en.wikipedia.org/wiki/Gigabeat Gigabeat V and S line from Toshiba].
* Supports [[multichannel]] audio and [[high resolution]]s.
* Tagging support (proprietary)
* Pipe support

''' WMAL cons '''
* Closed source
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* Doesn't support [[ReplayGain]]

''' WMAL Other features '''
* Fits the [[ASF]] container

=== Oddball Formats ===
There are several old lossless formats that aren't being featured in the article above. Reasons are: lack of widespread support, lack of features, bad efficiency and, most importantly, it seems no one is really interested in them.

Most of those would have disappeared by now, but some of them are being preserved for posterity at [[User:Rjamorim|rjamorim]]'s

* Advanced Digital Audio (ADA)
* Bonk
* Marian's a-Pac
* AudioZip
* Dakx WAV
* Entis Lab MIO
* LiteWave
* LPAC
* Pegasus SPS
* RK Audio (RKAU)
* Ogg Squish
* Sonarc
* VocPack
* WavArc
* WaveZip/MUSICompress

== See also ==
* [[Lossless]]

== External links ==
''' Other lossless compressions comparisons '''
''Sorted based on last '''update''' date.''

* [http://www.icer.nl/losslesstest/ Martijn van Beurden's comparison] - tries to compare all codecs and settings with a balanced pool of music (last updated 2013-08-10)
* [http://synthetic-soul.co.uk/comparison/lossless/ Synthetic Soul's comparison] (last update 2007-07-28)
* <s>Johan De Bock's speed oriented comparison</s> - best choices speedwise are indicated in green, mostly electronic music (last updated 2006-07-22)
* <s>Hans Heijden's</s> -- used as reference to build the table (last updated 2006-07-07)
* [http://synthetic-soul.co.uk/comparison/josef/ Josef Pohm's comparison, hosted by Synthetic Soul] (last update 2006-05-29)
* [http://www.bobulous.org.uk/misc/lossless_audio_2006.html Bobulous' lossless audio comparison] — a look at six lossless formats in terms of speed and file size (last updated 2006-05-22)
* <s>Jhan De Bock's size oriented comparison</s> - aimed only at the maximum compression setting for each codec (based on a somewhat limited set of samples, however) (last updated 2006-05-19)
* <s>Gruboolez'</s> -- comparing only classical music (last updated 2005-02-27)
* [http://members.home.nl/w.speek/comparison.htm Speek's] (last updated 2005-02-07)

''' More on lossless compressions '''
* [http://web.archive.org/web/20080731103800/http://www.losslessaudioblog.com/ The Lossless Audio Blog], retrieved from archive.org - by windmiller, is a reliable and complete source of news about lossless compression.
* Go to the [http://www.hydrogenaudio.org/forums/index.php?showtopic=33226 Hydrogenaudio thread] to discuss this article.

[[Category:Guides]]

Lossless comparison

2014-04-02T08:55:28Z

94.209.155.125: Removes the LPAC part, as it was removed from the table quite a while ago

The '''lossless comparison page''' aims to gather information about lossless codecs available so users can make an informed decision as to what lossless codec to choose for their needs.

== Introduction ==
Given the enormous amount of [[lossless]] audio compressor choices available, it is a very difficult task to choose the one most suited for each person's needs.

Several people only take into consideration compression performance when choosing a codec. But as the following table and article shows, there are several other features worth taking into consideration when making that choice.

For example, users wanting good multiplatform compatibility and robustness (e.g., people sharing live recordings) would favour [[WavPack]] or [[FLAC]]. Another user, looking for the very highest compression available, would go with [[OptimFROG]]. Someone wanting portable support would use [[FLAC]] or [[ALAC]], and so on.

En fin, this is not a matter worth getting too worked up about. If you later find out the codec you chose isn't the best for your needs, you can just transcompress to another format, without risk of losing quality.

'''Note:''' for latest comparison of lossless compression, scroll down to the [[Lossless comparison#External links|Links section of this page]].

== Comparison Table ==


{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | FLAC
| width="95px" style="background: #00FFFF" | WavPack
| width="95px" style="background: #00FFFF" | TAK
| width="95px" style="background: #00FFFF" | Monkey's
| width="95px" style="background: #00FFFF" | OptimFROG
| width="95px" style="background: #00FFFF" | ALAC
| width="95px" style="background: #00FFFF" | WMA
|-
|align="left" style="background: #FFFF99" | Encoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #CCFFCC" | fast
| style="background: #CCFFCC" | fast
|-
|align="left" style="background: #FFFF99" | Decoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #00FF00" | very fast
| style="background: #FF9900" | slow
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
|-
|align="left" style="background: #FFFF99" | Compression{{ref label|speed|A|A}}
| style="background: #CCFFCC" | 57.0%
| style="background: #CCFFCC" | 57.1%
| style="background: #00FF00" | 56.0%
| style="background: #00FF00" | 55.1%
| style="background: #00FF00" | 54.6%
| style="background: #CCFFCC" | 57.8%
| style="background: #FF9900" | 58.4%
|-
|align="left" style="background: #FFFF99" | Flexibility{{ref label|flex|B|B}}
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|style="background: #FFFFFF" |  
|-
|align="left" style="background: #FFFF99" | Error handling{{ref label|error|C|C}}
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Tagging
| style="background: #00FF00" | Vorbis tags
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | APEv2 (exp.)
| style="background: #00FF00" | ID3/APE
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | iTunes
| style="background: #CCFFCC" | ASF
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #00FF00" | very good
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #CCFFCC" | good
| style="background: #FF9900" | limited
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | LossyWAV
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FFFFFF" | sort of
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux Wine
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Mac
|}

''(table continued below)''

{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | Shorten
| width="95px" style="background: #00FFFF" | LA
| width="95px" style="background: #00FFFF" | TTA
| width="95px" style="background: #00FFFF" | MPEG-4 ALS
| width="95px" style="background: #00FFFF" | MPEG-4 SLS
| width="95px" style="background: #00FFFF" | Real Lossless
|-
| align="left" style="background: #FFFF99" | Encoding speed*
| style="background: #00FF00" | very fast
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
| style="background: #FF9900" | slow
| style="background: #FF9900" | slow
|-
| align="left" style="background: #FFFF99" | Decoding speed*
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | very slow
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #00FF00" | very fast
|-
| align="left" style="background: #FFFF99" | Compression*
| style="background: #FF9900" | 62.3%
| style="background: #00FF00" | 53.3%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | ?
| style="background: #CCFFCC" | ~56%
|-
| align="left" style="background: #FFFF99" | Flexibility**
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|! style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Error handling
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Tagging
| style="background: #FF9900" | no
| style="background: #CCFFCC" | ID3v1
| style="background: #CCFFCC" | ID3
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | proprietary
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #FF9900" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
|}

{|
|-
|{{note label|speed|A|A}} The Compression ratio is calculated with the division of compressed size by uncompressed size * 100. So, lower is better. Encoding speed, Decoding speed and Compression ratio are based on each encoder's default settings and are taken from the most recent lossless codec comparison mentioned at the [[Lossless_comparison#Other_lossless_compressions_comparisons|links section of this page]]. Encoding speed is very fast if > 150x, fast if >75x, average if >40x, slow if >20x, very slow if <20x. Decoding speed is similar but thresholds are doubled, i.e., very fast if >300x, fast if >150x etc. Thresholds for compression are at 56% and 58%
|-
|{{note label|flex|B|B}} Flexibility refers to the amount of encoding choices offered to the users (Fast/low compression, Slow/high compression and everything inbetween)
|-
|{{note label|error|C|C}} Error handling means that a codec can detect a corruption in a file and warn the user about it, but still decode most of the file, only leaving a small gap of silence where the error was detected. Corruption in this sense means bits that are flipped, not removed
|}

These are the most popular lossless codecs, in alphabetical order:

== Apple Lossless Audio Codec (ALAC) ==
http://www.apple.com/itunes/import.html

[[ALAC]] is a codec developed by Apple for usage in [[Apple iPod|iPod]] and AirPort Express.

=== ALAC pros ===
* Very fast decoding
* [[Open source]] (encoding and decoding via FFmpeg and [[CueTools|CUETools]], decoding only via [http://craz.net/programs/itunes/alac.html a standalone decoder])
* Hardware support ([[Apple iPod|iPod]], AirPort Express)
* Streaming support
* Tagging support (QT tags)
* Excellent hardware-software-lossy format integration with [[iTunes]]/iPod.
* Supports [[multichannel]] audio and [[high resolution]]s

=== ALAC cons ===
* Limited software support
* No error detection/robustness
* No hybrid/lossy mode

=== ALAC Other features ===
* Fits in the [[MP4]] container
* Can be used with the AirPort Express gadget

== Free Lossless Audio Codec (FLAC) ==
https://xiph.org/flac/

[[FLAC]] is a lossless codec developed by Josh Coalson. It's part of the Xiph multimedia portfolio, along with [[Ogg]], [[Vorbis]], [[Speex]] and [[Theora]].

=== FLAC pros ===
* [[Open source]]
* Very fast decoding
* Fast encoding
* Hardware support ([[Rio Karma|Karma]], Phatbox, etc.)
* Very good software support
* Error robustness
* Streaming support
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support (FLAC tags)
* Supports [[RIFF]] chunks
* Pipe support
* [[ReplayGain]] compatible

=== FLAC cons ===
* No hybrid/lossy mode
* No support in iTunes (or other Apple products)

=== FLAC Other features ===
* Supports embedded CUE sheets (with [http://flac.sourceforge.net/faq.html#general__no_cuesheet_tags limitations])
* Includes MD5 hashes for quick integrity checking
* Fits the [[Ogg]] and [[Matroska]] containers

== LosslessAudio (LA) ==
http://www.lossless-audio.com/

[[LA]] is a lossless codec developed by Michael Bevin.

=== LA pros ===
* Very high compression
* Tagging support ([[ID3v1]])
* Supports [[RIFF]] chunks
* Pipe support

=== LA cons ===
* Closed source
* Very slow encoding and decoding
* Doesn't support [[multichannel]] audio and [[high resolution]]s
* No hardware support
* No hybrid/lossy mode
* Bad software support
* Doesn't support [[ReplayGain]]

'''''It's important to mention that the LA foobar plugin is buggy and doesn't produce lossless streams!'''''

== Monkey's Audio (APE) ==
http://www.monkeysaudio.com/

[[Monkey's Audio]] is a very efficient lossless compressor developed by Matt Ashland.

=== APE pros ===
* High efficiency
* Good software support
* Simple and user friendly. Official GUI provided.
* Java version (multiplatform)
* Tagging support ([[ID3v1]], [[APE tags]])
* [[High resolution]] audio support
* Supports [[RIFF]] chunks (only in the GUI encoder)
* Pipe support (only in a [http://www.etree.org/shnutils/shntool/ special] version)

=== APE cons ===
* Problematic license (source provided, no modification or redistribution rights)
* No [[multichannel]] support
* No error robustness
* No hybrid/lossy mode
* Limited hardware support (Rockbox, some Cowon players); poor battery life due to complicated decoding [http://www.rockbox.org/wiki/SoundCodecMonkeysAudio MP3 player benchmarks]
* Higher compression levels are extremely CPU intensive
* Doesn't support [[ReplayGain]]

=== APE Other features ===
* Includes MD5 hashes for quick integrity checking
* Supports APL image link files (similar to CUE sheets)

== MPEG-4 SLS ==
MPEG-4 SLS allows audio encoding from lossless scalable to [[AAC]].

=== SLS pros ===
* Transcoding to standard AAC or any higher lossy bitrate at the speed of copying a file
* Scalable decoding from lossless, to any bitrate down to the AAC core track
* Best lossless compression available when you count the AAC track (~5% gain over any other lossless compression + AAC)
* [[High resolution]] audio support
* Multi channel audio support
* [[Open source]] (MPEG-4 Reference code)
* Embedded in standard MP4 files, so supports same tagging and ReplayGain features as AAC does.

=== SLS cons ===
* No usable software available yet
* Pure lossless compression not the best there is
* Seems to be slow in encoding and decoding, but we have to wait for released software

=== SLS Other features ===
* Transform based lossless codec with optional LC AAC core track

== OptimFROG (OFR) ==
http://www.losslessaudio.org/

[[OptimFROG]] is a lossless format developed by Florin Ghido to become the champion in audio compression.

=== OFR pros ===
* Very high compression
* Good software support
* Error robustness
* Streaming support
* Supports [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3]], [[APE tags]])
* Supports [[RIFF]] chunks
* [[ReplayGain]] compatible

=== OFR cons ===
* Closed source
* No [[multichannel]] audio support
* No hardware support
* Quite slow decoding

=== OFR Other features ===
* Supports 32bit float streams
* Includes MD5 hashes for quick integrity checking

== RealAudio Lossless (RAL) ==
http://www.realnetworks.com/products/codecs/realaudio.html

RealAudio lossless is the lossless codec developed by Real Networks for their multimedia portfolio

=== RAL pros ===
* Very fast decoding
* Streaming support
* Tagging support (proprietary)

=== RAL cons ===
* Closed source
* No [[multichannel]] and [[high resolution]] audio support
* Little software support (Real Player)
* No hardware support
* Compression efficiency not on par with other lossless codecs
* No hybrid/lossy mode
* No pipe support
* Doesn't support [[ReplayGain]]

== Shorten (SHN) ==
http://www.etree.org/shnutils/shorten/

[[Shorten]] is a very old and featureless lossless codec developed by Tony Robinson at SoftSound.

=== SHN pros ===
* [[Open source]]
* Fast decoding
* Very good software support
* Supports [[RIFF]] chunks
* Pipe support

=== SHN cons ===
* Quite inefficient
* No [[multichannel]] or [[high resolution]] audio support
* No hybrid/lossy mode
* No error robustness
* Not streamable
* No hardware support
* No native tagging
* Doesn't support [[ReplayGain]]

== True Audio (TTA) ==
http://www.true-audio.com/

[[TTA]] is a new lossless codec developed by a team of russian programmers.

=== TTA pros ===
* [[Open source]]
* Good efficiency
* Hardware support (obscure DVD player)
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support ([[ID3]])
* [[ReplayGain]] compatible
* Error robustness

=== TTA cons ===
* No streaming support
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* No pipe support

=== TTA Other features ===
* Fits the [[Matroska]] container

== WavPack (WV) ==
http://www.wavpack.com/

[[WavPack]] is a fast and featureful lossless codec developed by David Bryant.

=== WV pros ===
* [[Open source]]
* Very fast decoding
* Very fast encoding
* Good efficiency
* Error robustness
* Streaming support
* Hardware support ([http://www.rockbox.org/ RockBox])
* Supports [[multichannel]] audio and [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3v1]], [[APE tags]])
* Supports [[RIFF]] chunks
* Ability to create self extracting files for Win32 platform
* Pipe support
* Good software support
* [[ReplayGain]] compatible

=== WV cons ===
* Limited hardware player support

=== WV Other features ===
* Supports 32bit float streams
* Supports embedded CUE sheets
* Includes MD5 hashes for quick integrity checking
* Can encode in both symmetrical and asymmetrical modes.
* Fits the [[Matroska]] container

== Windows Media Audio Lossless (WMAL) ==
http://www.microsoft.com/windows/windowsmedia/9series/codecs/audio.aspx

WMA Lossless is the lossless codec developed by Microsoft to be featured in their Windows Media codec portfolio.

=== WMAL pros ===
* Streaming support
* Very good software support
* Hardware support (All Microsoft Zunes though older models may need firmware updates, also supported by some non-Microsoft devices like the [http://en.wikipedia.org/wiki/Gigabeat Gigabeat V and S line from Toshiba].
* Supports [[multichannel]] audio and [[high resolution]]s.
* Tagging support (proprietary)
* Pipe support

=== WMAL cons ===
* Closed source
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* Doesn't support [[ReplayGain]]

=== WMAL Other features ===
* Fits the [[ASF]] container

== Oddball Formats ==
There are several old lossless formats that aren't being featured in the article above. Reasons are: lack of widespread support, lack of features, bad efficiency and, most importantly, it seems no one is really interested in them.

Most of those would have disappeared by now, but some of them are being preserved for posterity at [[User:Rjamorim|rjamorim]]'s

* Advanced Digital Audio (ADA)
* Bonk
* Marian's a-Pac
* AudioZip
* Dakx WAV
* Entis Lab MIO
* LiteWave
* LPAC
* Pegasus SPS
* RK Audio (RKAU)
* Ogg Squish
* Sonarc
* VocPack
* WavArc
* WaveZip/MUSICompress

== See also ==
* [[Lossless]]

== External links ==
=== Other lossless compressions comparisons ===
''Sorted based on last '''update''' date.''

* [http://www.icer.nl/losslesstest/ Martijn van Beurden's comparison] - tries to compare all codecs and settings with a balanced pool of music (last updated 2013-08-10)
* [http://synthetic-soul.co.uk/comparison/lossless/ Synthetic Soul's comparison] (last update 2007-07-28)
* <s>Johan De Bock's speed oriented comparison</s> - best choices speedwise are indicated in green, mostly electronic music (last updated 2006-07-22)
* <s>Hans Heijden's</s> -- used as reference to build the table (last updated 2006-07-07)
* [http://synthetic-soul.co.uk/comparison/josef/ Josef Pohm's comparison, hosted by Synthetic Soul] (last update 2006-05-29)
* [http://www.bobulous.org.uk/misc/lossless_audio_2006.html Bobulous' lossless audio comparison] — a look at six lossless formats in terms of speed and file size (last updated 2006-05-22)
* <s>Jhan De Bock's size oriented comparison</s> - aimed only at the maximum compression setting for each codec (based on a somewhat limited set of samples, however) (last updated 2006-05-19)
* <s>Gruboolez'</s> -- comparing only classical music (last updated 2005-02-27)
* [http://members.home.nl/w.speek/comparison.htm Speek's] (last updated 2005-02-07)

=== More on lossless compressions ===
* [http://web.archive.org/web/20080731103800/http://www.losslessaudioblog.com/ The Lossless Audio Blog], retrieved from archive.org - by windmiller, is a reliable and complete source of news about lossless compression.
* Go to the [http://www.hydrogenaudio.org/forums/index.php?showtopic=33226 Hydrogenaudio thread] to discuss this article.

[[Category:Guides]]

Lossless comparison

2014-04-01T21:28:38Z

94.209.155.125: Fixed a problem with those freshly added footnotes

The '''lossless comparison page''' aims to gather information about lossless codecs available so users can make an informed decision as to what lossless codec to choose for their needs.

== Introduction ==
Given the enormous amount of [[lossless]] audio compressor choices available, it is a very difficult task to choose the one most suited for each person's needs.

Several people only take into consideration compression performance when choosing a codec. But as the following table and article shows, there are several other features worth taking into consideration when making that choice.

For example, users wanting good multiplatform compatibility and robustness (e.g., people sharing live recordings) would favour [[WavPack]] or [[FLAC]]. Another user, looking for the very highest compression available, would go with [[OptimFROG]]. Someone wanting portable support would use [[FLAC]] or [[ALAC]], and so on.

En fin, this is not a matter worth getting too worked up about. If you later find out the codec you chose isn't the best for your needs, you can just transcompress to another format, without risk of losing quality.

'''Note:''' for latest comparison of lossless compression, scroll down to the [[Lossless comparison#External links|Links section of this page]].

== Comparison Table ==


{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | FLAC
| width="95px" style="background: #00FFFF" | WavPack
| width="95px" style="background: #00FFFF" | TAK
| width="95px" style="background: #00FFFF" | Monkey's
| width="95px" style="background: #00FFFF" | OptimFROG
| width="95px" style="background: #00FFFF" | ALAC
| width="95px" style="background: #00FFFF" | WMA
|-
|align="left" style="background: #FFFF99" | Encoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #CCFFCC" | fast
| style="background: #CCFFCC" | fast
|-
|align="left" style="background: #FFFF99" | Decoding speed{{ref label|speed|A|A}}
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #00FF00" | very fast
| style="background: #FF9900" | slow
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
|-
|align="left" style="background: #FFFF99" | Compression{{ref label|speed|A|A}}
| style="background: #CCFFCC" | 57.0%
| style="background: #CCFFCC" | 57.1%
| style="background: #00FF00" | 56.0%
| style="background: #00FF00" | 55.1%
| style="background: #00FF00" | 54.6%
| style="background: #CCFFCC" | 57.8%
| style="background: #FF9900" | 58.4%
|-
|align="left" style="background: #FFFF99" | Flexibility{{ref label|flex|B|B}}
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|style="background: #FFFFFF" |  
|-
|align="left" style="background: #FFFF99" | Error handling{{ref label|error|C|C}}
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Tagging
| style="background: #00FF00" | Vorbis tags
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | APEv2 (exp.)
| style="background: #00FF00" | ID3/APE
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | iTunes
| style="background: #CCFFCC" | ASF
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #00FF00" | very good
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #CCFFCC" | good
| style="background: #FF9900" | limited
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | LossyWAV
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FFFFFF" | sort of
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux Wine
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Mac
|}

''(table continued below)''

{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | Shorten
| width="95px" style="background: #00FFFF" | LA
| width="95px" style="background: #00FFFF" | TTA
| width="95px" style="background: #00FFFF" | MPEG-4 ALS
| width="95px" style="background: #00FFFF" | MPEG-4 SLS
| width="95px" style="background: #00FFFF" | Real Lossless
|-
| align="left" style="background: #FFFF99" | Encoding speed*
| style="background: #00FF00" | very fast
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
| style="background: #FF9900" | slow
| style="background: #FF9900" | slow
|-
| align="left" style="background: #FFFF99" | Decoding speed*
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | very slow
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #00FF00" | very fast
|-
| align="left" style="background: #FFFF99" | Compression*
| style="background: #FF9900" | 62.3%
| style="background: #00FF00" | 53.3%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | ?
| style="background: #CCFFCC" | ~56%
|-
| align="left" style="background: #FFFF99" | Flexibility**
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|! style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Error handling
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Tagging
| style="background: #FF9900" | no
| style="background: #CCFFCC" | ID3v1
| style="background: #CCFFCC" | ID3
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | proprietary
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #FF9900" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
|}

{|
|-
|{{note label|speed|A|A}} The Compression ratio is calculated with the division of compressed size by uncompressed size * 100. So, lower is better. Encoding speed, Decoding speed and Compression ratio are based on each encoder's default settings and are taken from the most recent lossless codec comparison mentioned at the [[Lossless_comparison#Other_lossless_compressions_comparisons|links section of this page]]. Encoding speed is very fast if > 150x, fast if >75x, average if >40x, slow if >20x, very slow if <20x. Decoding speed is similar but thresholds are doubled, i.e., very fast if >300x, fast if >150x etc. Thresholds for compression are at 56% and 58%
|-
|{{note label|flex|B|B}} Flexibility refers to the amount of encoding choices offered to the users (Fast/low compression, Slow/high compression and everything inbetween)
|-
|{{note label|error|C|C}} Error handling means that a codec can detect a corruption in a file and warn the user about it, but still decode most of the file, only leaving a small gap of silence where the error was detected. Corruption in this sense means bits that are flipped, not removed
|}

These are the most popular lossless codecs, in alphabetical order:

== Apple Lossless Audio Codec (ALAC) ==
http://www.apple.com/itunes/import.html

[[ALAC]] is a codec developed by Apple for usage in [[Apple iPod|iPod]] and AirPort Express.

=== ALAC pros ===
* Very fast decoding
* [[Open source]] (encoding and decoding via FFmpeg and [[CueTools|CUETools]], decoding only via [http://craz.net/programs/itunes/alac.html a standalone decoder])
* Hardware support ([[Apple iPod|iPod]], AirPort Express)
* Streaming support
* Tagging support (QT tags)
* Excellent hardware-software-lossy format integration with [[iTunes]]/iPod.
* Supports [[multichannel]] audio and [[high resolution]]s

=== ALAC cons ===
* Limited software support
* No error detection/robustness
* No hybrid/lossy mode

=== ALAC Other features ===
* Fits in the [[MP4]] container
* Can be used with the AirPort Express gadget

== Free Lossless Audio Codec (FLAC) ==
https://xiph.org/flac/

[[FLAC]] is a lossless codec developed by Josh Coalson. It's part of the Xiph multimedia portfolio, along with [[Ogg]], [[Vorbis]], [[Speex]] and [[Theora]].

=== FLAC pros ===
* [[Open source]]
* Very fast decoding
* Fast encoding
* Hardware support ([[Rio Karma|Karma]], Phatbox, etc.)
* Very good software support
* Error robustness
* Streaming support
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support (FLAC tags)
* Supports [[RIFF]] chunks
* Pipe support
* [[ReplayGain]] compatible

=== FLAC cons ===
* No hybrid/lossy mode
* No support in iTunes (or other Apple products)

=== FLAC Other features ===
* Supports embedded CUE sheets (with [http://flac.sourceforge.net/faq.html#general__no_cuesheet_tags limitations])
* Includes MD5 hashes for quick integrity checking
* Fits the [[Ogg]] and [[Matroska]] containers

== LosslessAudio (LA) ==
http://www.lossless-audio.com/

[[LA]] is a lossless codec developed by Michael Bevin.

=== LA pros ===
* Very high compression
* Tagging support ([[ID3v1]])
* Supports [[RIFF]] chunks
* Pipe support

=== LA cons ===
* Closed source
* Very slow encoding and decoding
* Doesn't support [[multichannel]] audio and [[high resolution]]s
* No hardware support
* No hybrid/lossy mode
* Bad software support
* Doesn't support [[ReplayGain]]

'''''It's important to mention that the LA foobar plugin is buggy and doesn't produce lossless streams!'''''

== Lossless Predictive Audio Coder (LPAC) ==
* [http://www.nue.tu-berlin.de/menue/mitarbeiter/ehemalige_mitarbeiter/tilman_liebchen/lpac_-_lossless_audio_codec_for_windows_and_linux/ LPAC website]

[[Lossless Predictive Audio Coder]] (LPAC) is a lossless codec developed by Tilman Liebchen. Development of it has been halted in favour of development of [[MPEG-4]] ALS.

=== LPAC pros ===
* Reasonable compression ratios
* [[High resolution]] audio support
* Supports [[RIFF]] chunks

=== LPAC cons ===
* Closed source
* No error robustness
* Slow seeking
* No tagging
* No [[multichannel]] support
* No hybrid/lossy mode
* No hardware support
* Doesn't support [[ReplayGain]]

== Monkey's Audio (APE) ==
http://www.monkeysaudio.com/

[[Monkey's Audio]] is a very efficient lossless compressor developed by Matt Ashland.

=== APE pros ===
* High efficiency
* Good software support
* Simple and user friendly. Official GUI provided.
* Java version (multiplatform)
* Tagging support ([[ID3v1]], [[APE tags]])
* [[High resolution]] audio support
* Supports [[RIFF]] chunks (only in the GUI encoder)
* Pipe support (only in a [http://www.etree.org/shnutils/shntool/ special] version)

=== APE cons ===
* Problematic license (source provided, no modification or redistribution rights)
* No [[multichannel]] support
* No error robustness
* No hybrid/lossy mode
* Limited hardware support (Rockbox, some Cowon players); poor battery life due to complicated decoding [http://www.rockbox.org/wiki/SoundCodecMonkeysAudio MP3 player benchmarks]
* Higher compression levels are extremely CPU intensive
* Doesn't support [[ReplayGain]]

=== APE Other features ===
* Includes MD5 hashes for quick integrity checking
* Supports APL image link files (similar to CUE sheets)

== MPEG-4 SLS ==
MPEG-4 SLS allows audio encoding from lossless scalable to [[AAC]].

=== SLS pros ===
* Transcoding to standard AAC or any higher lossy bitrate at the speed of copying a file
* Scalable decoding from lossless, to any bitrate down to the AAC core track
* Best lossless compression available when you count the AAC track (~5% gain over any other lossless compression + AAC)
* [[High resolution]] audio support
* Multi channel audio support
* [[Open source]] (MPEG-4 Reference code)
* Embedded in standard MP4 files, so supports same tagging and ReplayGain features as AAC does.

=== SLS cons ===
* No usable software available yet
* Pure lossless compression not the best there is
* Seems to be slow in encoding and decoding, but we have to wait for released software

=== SLS Other features ===
* Transform based lossless codec with optional LC AAC core track

== OptimFROG (OFR) ==
http://www.losslessaudio.org/

[[OptimFROG]] is a lossless format developed by Florin Ghido to become the champion in audio compression.

=== OFR pros ===
* Very high compression
* Good software support
* Error robustness
* Streaming support
* Supports [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3]], [[APE tags]])
* Supports [[RIFF]] chunks
* [[ReplayGain]] compatible

=== OFR cons ===
* Closed source
* No [[multichannel]] audio support
* No hardware support
* Quite slow decoding

=== OFR Other features ===
* Supports 32bit float streams
* Includes MD5 hashes for quick integrity checking

== RealAudio Lossless (RAL) ==
http://www.realnetworks.com/products/codecs/realaudio.html

RealAudio lossless is the lossless codec developed by Real Networks for their multimedia portfolio

=== RAL pros ===
* Very fast decoding
* Streaming support
* Tagging support (proprietary)

=== RAL cons ===
* Closed source
* No [[multichannel]] and [[high resolution]] audio support
* Little software support (Real Player)
* No hardware support
* Compression efficiency not on par with other lossless codecs
* No hybrid/lossy mode
* No pipe support
* Doesn't support [[ReplayGain]]

== Shorten (SHN) ==
http://www.etree.org/shnutils/shorten/

[[Shorten]] is a very old and featureless lossless codec developed by Tony Robinson at SoftSound.

=== SHN pros ===
* [[Open source]]
* Fast decoding
* Very good software support
* Supports [[RIFF]] chunks
* Pipe support

=== SHN cons ===
* Quite inefficient
* No [[multichannel]] or [[high resolution]] audio support
* No hybrid/lossy mode
* No error robustness
* Not streamable
* No hardware support
* No native tagging
* Doesn't support [[ReplayGain]]

== True Audio (TTA) ==
http://www.true-audio.com/

[[TTA]] is a new lossless codec developed by a team of russian programmers.

=== TTA pros ===
* [[Open source]]
* Good efficiency
* Hardware support (obscure DVD player)
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support ([[ID3]])
* [[ReplayGain]] compatible
* Error robustness

=== TTA cons ===
* No streaming support
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* No pipe support

=== TTA Other features ===
* Fits the [[Matroska]] container

== WavPack (WV) ==
http://www.wavpack.com/

[[WavPack]] is a fast and featureful lossless codec developed by David Bryant.

=== WV pros ===
* [[Open source]]
* Very fast decoding
* Very fast encoding
* Good efficiency
* Error robustness
* Streaming support
* Hardware support ([http://www.rockbox.org/ RockBox])
* Supports [[multichannel]] audio and [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3v1]], [[APE tags]])
* Supports [[RIFF]] chunks
* Ability to create self extracting files for Win32 platform
* Pipe support
* Good software support
* [[ReplayGain]] compatible

=== WV cons ===
* Limited hardware player support

=== WV Other features ===
* Supports 32bit float streams
* Supports embedded CUE sheets
* Includes MD5 hashes for quick integrity checking
* Can encode in both symmetrical and asymmetrical modes.
* Fits the [[Matroska]] container

== Windows Media Audio Lossless (WMAL) ==
http://www.microsoft.com/windows/windowsmedia/9series/codecs/audio.aspx

WMA Lossless is the lossless codec developed by Microsoft to be featured in their Windows Media codec portfolio.

=== WMAL pros ===
* Streaming support
* Very good software support
* Hardware support (All Microsoft Zunes though older models may need firmware updates, also supported by some non-Microsoft devices like the [http://en.wikipedia.org/wiki/Gigabeat Gigabeat V and S line from Toshiba].
* Supports [[multichannel]] audio and [[high resolution]]s.
* Tagging support (proprietary)
* Pipe support

=== WMAL cons ===
* Closed source
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* Doesn't support [[ReplayGain]]

=== WMAL Other features ===
* Fits the [[ASF]] container

== Oddball Formats ==
There are several old lossless formats that aren't being featured in the article above. Reasons are: lack of widespread support, lack of features, bad efficiency and, most importantly, it seems no one is really interested in them.

Most of those would have disappeared by now, but they are being preserved for posterity at [[User:Rjamorim|rjamorim]]'s

Advanced Digital Audio (ADA)

Bonk

Marian's a-Pac

AudioZip

Dakx WAV

Entis Lab MIO

LiteWave

Pegasus SPS

RK Audio (RKAU)

Sonarc

VocPack

WavArc

WaveZip/MUSICompress

== See also ==
* [[Lossless]]

== External links ==
=== Other lossless compressions comparisons ===
''Sorted based on last '''update''' date.''

* [http://www.icer.nl/losslesstest/ Martijn van Beurden's comparison] - tries to compare all codecs and settings with a balanced pool of music (last updated 2013-08-10)
* [http://synthetic-soul.co.uk/comparison/lossless/ Synthetic Soul's comparison] (last update 2007-07-28)
* <s>Johan De Bock's speed oriented comparison</s> - best choices speedwise are indicated in green, mostly electronic music (last updated 2006-07-22)
* <s>Hans Heijden's</s> -- used as reference to build the table (last updated 2006-07-07)
* [http://synthetic-soul.co.uk/comparison/josef/ Josef Pohm's comparison, hosted by Synthetic Soul] (last update 2006-05-29)
* [http://www.bobulous.org.uk/misc/lossless_audio_2006.html Bobulous' lossless audio comparison] — a look at six lossless formats in terms of speed and file size (last updated 2006-05-22)
* <s>Jhan De Bock's size oriented comparison</s> - aimed only at the maximum compression setting for each codec (based on a somewhat limited set of samples, however) (last updated 2006-05-19)
* <s>Gruboolez'</s> -- comparing only classical music (last updated 2005-02-27)
* [http://members.home.nl/w.speek/comparison.htm Speek's] (last updated 2005-02-07)

=== More on lossless compressions ===
* [http://web.archive.org/web/20080731103800/http://www.losslessaudioblog.com/ The Lossless Audio Blog], retrieved from archive.org - by windmiller, is a reliable and complete source of news about lossless compression.
* Go to the [http://www.hydrogenaudio.org/forums/index.php?showtopic=33226 Hydrogenaudio thread] to discuss this article.

[[Category:Guides]]

Lossless comparison

2014-04-01T21:22:08Z

94.209.155.125: Cleaned up table footnotes

The '''lossless comparison page''' aims to gather information about lossless codecs available so users can make an informed decision as to what lossless codec to choose for their needs.

== Introduction ==
Given the enormous amount of [[lossless]] audio compressor choices available, it is a very difficult task to choose the one most suited for each person's needs.

Several people only take into consideration compression performance when choosing a codec. But as the following table and article shows, there are several other features worth taking into consideration when making that choice.

For example, users wanting good multiplatform compatibility and robustness (e.g., people sharing live recordings) would favour [[WavPack]] or [[FLAC]]. Another user, looking for the very highest compression available, would go with [[OptimFROG]]. Someone wanting portable support would use [[FLAC]] or [[ALAC]], and so on.

En fin, this is not a matter worth getting too worked up about. If you later find out the codec you chose isn't the best for your needs, you can just transcompress to another format, without risk of losing quality.

'''Note:''' for latest comparison of lossless compression, scroll down to the [[Lossless comparison#External links|Links section of this page]].

== Comparison Table ==


{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | FLAC
| width="95px" style="background: #00FFFF" | WavPack
| width="95px" style="background: #00FFFF" | TAK
| width="95px" style="background: #00FFFF" | Monkey's
| width="95px" style="background: #00FFFF" | OptimFROG
| width="95px" style="background: #00FFFF" | ALAC
| width="95px" style="background: #00FFFF" | WMA
|-
|align="left" style="background: #FFFF99" | Encoding speed{{ref label|speed|A|^}}
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #CCFFCC" | fast
| style="background: #CCFFCC" | fast
|-
|align="left" style="background: #FFFF99" | Decoding speed{{ref label|speed|A|^}}
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #00FF00" | very fast
| style="background: #FF9900" | slow
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
|-
|align="left" style="background: #FFFF99" | Compression{{ref label|speed|A|^}}
| style="background: #CCFFCC" | 57.0%
| style="background: #CCFFCC" | 57.1%
| style="background: #00FF00" | 56.0%
| style="background: #00FF00" | 55.1%
| style="background: #00FF00" | 54.6%
| style="background: #CCFFCC" | 57.8%
| style="background: #FF9900" | 58.4%
|-
|align="left" style="background: #FFFF99" | Flexibility{{ref label|flex|B|^}}
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|style="background: #FFFFFF" |  
|-
|align="left" style="background: #FFFF99" | Error handling{{ref label|error|C|^}}
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Tagging
| style="background: #00FF00" | Vorbis tags
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | APEv2 (exp.)
| style="background: #00FF00" | ID3/APE
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | iTunes
| style="background: #CCFFCC" | ASF
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #00FF00" | very good
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #CCFFCC" | good
| style="background: #FF9900" | limited
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | LossyWAV
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FFFFFF" | sort of
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux Wine
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Mac
|}

''(table continued below)''

{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | Shorten
| width="95px" style="background: #00FFFF" | LA
| width="95px" style="background: #00FFFF" | TTA
| width="95px" style="background: #00FFFF" | MPEG-4 ALS
| width="95px" style="background: #00FFFF" | MPEG-4 SLS
| width="95px" style="background: #00FFFF" | Real Lossless
|-
| align="left" style="background: #FFFF99" | Encoding speed*
| style="background: #00FF00" | very fast
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
| style="background: #FF9900" | slow
| style="background: #FF9900" | slow
|-
| align="left" style="background: #FFFF99" | Decoding speed*
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | very slow
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #00FF00" | very fast
|-
| align="left" style="background: #FFFF99" | Compression*
| style="background: #FF9900" | 62.3%
| style="background: #00FF00" | 53.3%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | ?
| style="background: #CCFFCC" | ~56%
|-
| align="left" style="background: #FFFF99" | Flexibility**
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|! style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Error handling
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Tagging
| style="background: #FF9900" | no
| style="background: #CCFFCC" | ID3v1
| style="background: #CCFFCC" | ID3
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | proprietary
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #FF9900" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
|}

{|
|-
|{{note label|speed|A|A}} The Compression ratio is calculated with the division of compressed size by uncompressed size * 100. So, lower is better. Encoding speed, Decoding speed and Compression ratio are based on each encoder's default settings and are taken from the most recent lossless codec comparison mentioned at the [[Lossless_comparison#Other_lossless_compressions_comparisons|links section of this page]]. Encoding speed is very fast if > 150x, fast if >75x, average if >40x, slow if >20x, very slow if <20x. Decoding speed is similar but thresholds are doubled, i.e., very fast if >300x, fast if >150x etc. Thresholds for compression are at 56% and 58%
|-
|{{note label|flex|B|B}} Flexibility refers to the amount of encoding choices offered to the users (Fast/low compression, Slow/high compression and everything inbetween)
|-
|{{note label|error|C|C}} Error handling means that a codec can detect a corruption in a file and warn the user about it, but still decode most of the file, only leaving a small gap of silence where the error was detected. Corruption in this sense means bits that are flipped, not removed
|}

These are the most popular lossless codecs, in alphabetical order:

== Apple Lossless Audio Codec (ALAC) ==
http://www.apple.com/itunes/import.html

[[ALAC]] is a codec developed by Apple for usage in [[Apple iPod|iPod]] and AirPort Express.

=== ALAC pros ===
* Very fast decoding
* [[Open source]] (encoding and decoding via FFmpeg and [[CueTools|CUETools]], decoding only via [http://craz.net/programs/itunes/alac.html a standalone decoder])
* Hardware support ([[Apple iPod|iPod]], AirPort Express)
* Streaming support
* Tagging support (QT tags)
* Excellent hardware-software-lossy format integration with [[iTunes]]/iPod.
* Supports [[multichannel]] audio and [[high resolution]]s

=== ALAC cons ===
* Limited software support
* No error detection/robustness
* No hybrid/lossy mode

=== ALAC Other features ===
* Fits in the [[MP4]] container
* Can be used with the AirPort Express gadget

== Free Lossless Audio Codec (FLAC) ==
https://xiph.org/flac/

[[FLAC]] is a lossless codec developed by Josh Coalson. It's part of the Xiph multimedia portfolio, along with [[Ogg]], [[Vorbis]], [[Speex]] and [[Theora]].

=== FLAC pros ===
* [[Open source]]
* Very fast decoding
* Fast encoding
* Hardware support ([[Rio Karma|Karma]], Phatbox, etc.)
* Very good software support
* Error robustness
* Streaming support
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support (FLAC tags)
* Supports [[RIFF]] chunks
* Pipe support
* [[ReplayGain]] compatible

=== FLAC cons ===
* No hybrid/lossy mode
* No support in iTunes (or other Apple products)

=== FLAC Other features ===
* Supports embedded CUE sheets (with [http://flac.sourceforge.net/faq.html#general__no_cuesheet_tags limitations])
* Includes MD5 hashes for quick integrity checking
* Fits the [[Ogg]] and [[Matroska]] containers

== LosslessAudio (LA) ==
http://www.lossless-audio.com/

[[LA]] is a lossless codec developed by Michael Bevin.

=== LA pros ===
* Very high compression
* Tagging support ([[ID3v1]])
* Supports [[RIFF]] chunks
* Pipe support

=== LA cons ===
* Closed source
* Very slow encoding and decoding
* Doesn't support [[multichannel]] audio and [[high resolution]]s
* No hardware support
* No hybrid/lossy mode
* Bad software support
* Doesn't support [[ReplayGain]]

'''''It's important to mention that the LA foobar plugin is buggy and doesn't produce lossless streams!'''''

== Lossless Predictive Audio Coder (LPAC) ==
* [http://www.nue.tu-berlin.de/menue/mitarbeiter/ehemalige_mitarbeiter/tilman_liebchen/lpac_-_lossless_audio_codec_for_windows_and_linux/ LPAC website]

[[Lossless Predictive Audio Coder]] (LPAC) is a lossless codec developed by Tilman Liebchen. Development of it has been halted in favour of development of [[MPEG-4]] ALS.

=== LPAC pros ===
* Reasonable compression ratios
* [[High resolution]] audio support
* Supports [[RIFF]] chunks

=== LPAC cons ===
* Closed source
* No error robustness
* Slow seeking
* No tagging
* No [[multichannel]] support
* No hybrid/lossy mode
* No hardware support
* Doesn't support [[ReplayGain]]

== Monkey's Audio (APE) ==
http://www.monkeysaudio.com/

[[Monkey's Audio]] is a very efficient lossless compressor developed by Matt Ashland.

=== APE pros ===
* High efficiency
* Good software support
* Simple and user friendly. Official GUI provided.
* Java version (multiplatform)
* Tagging support ([[ID3v1]], [[APE tags]])
* [[High resolution]] audio support
* Supports [[RIFF]] chunks (only in the GUI encoder)
* Pipe support (only in a [http://www.etree.org/shnutils/shntool/ special] version)

=== APE cons ===
* Problematic license (source provided, no modification or redistribution rights)
* No [[multichannel]] support
* No error robustness
* No hybrid/lossy mode
* Limited hardware support (Rockbox, some Cowon players); poor battery life due to complicated decoding [http://www.rockbox.org/wiki/SoundCodecMonkeysAudio MP3 player benchmarks]
* Higher compression levels are extremely CPU intensive
* Doesn't support [[ReplayGain]]

=== APE Other features ===
* Includes MD5 hashes for quick integrity checking
* Supports APL image link files (similar to CUE sheets)

== MPEG-4 SLS ==
MPEG-4 SLS allows audio encoding from lossless scalable to [[AAC]].

=== SLS pros ===
* Transcoding to standard AAC or any higher lossy bitrate at the speed of copying a file
* Scalable decoding from lossless, to any bitrate down to the AAC core track
* Best lossless compression available when you count the AAC track (~5% gain over any other lossless compression + AAC)
* [[High resolution]] audio support
* Multi channel audio support
* [[Open source]] (MPEG-4 Reference code)
* Embedded in standard MP4 files, so supports same tagging and ReplayGain features as AAC does.

=== SLS cons ===
* No usable software available yet
* Pure lossless compression not the best there is
* Seems to be slow in encoding and decoding, but we have to wait for released software

=== SLS Other features ===
* Transform based lossless codec with optional LC AAC core track

== OptimFROG (OFR) ==
http://www.losslessaudio.org/

[[OptimFROG]] is a lossless format developed by Florin Ghido to become the champion in audio compression.

=== OFR pros ===
* Very high compression
* Good software support
* Error robustness
* Streaming support
* Supports [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3]], [[APE tags]])
* Supports [[RIFF]] chunks
* [[ReplayGain]] compatible

=== OFR cons ===
* Closed source
* No [[multichannel]] audio support
* No hardware support
* Quite slow decoding

=== OFR Other features ===
* Supports 32bit float streams
* Includes MD5 hashes for quick integrity checking

== RealAudio Lossless (RAL) ==
http://www.realnetworks.com/products/codecs/realaudio.html

RealAudio lossless is the lossless codec developed by Real Networks for their multimedia portfolio

=== RAL pros ===
* Very fast decoding
* Streaming support
* Tagging support (proprietary)

=== RAL cons ===
* Closed source
* No [[multichannel]] and [[high resolution]] audio support
* Little software support (Real Player)
* No hardware support
* Compression efficiency not on par with other lossless codecs
* No hybrid/lossy mode
* No pipe support
* Doesn't support [[ReplayGain]]

== Shorten (SHN) ==
http://www.etree.org/shnutils/shorten/

[[Shorten]] is a very old and featureless lossless codec developed by Tony Robinson at SoftSound.

=== SHN pros ===
* [[Open source]]
* Fast decoding
* Very good software support
* Supports [[RIFF]] chunks
* Pipe support

=== SHN cons ===
* Quite inefficient
* No [[multichannel]] or [[high resolution]] audio support
* No hybrid/lossy mode
* No error robustness
* Not streamable
* No hardware support
* No native tagging
* Doesn't support [[ReplayGain]]

== True Audio (TTA) ==
http://www.true-audio.com/

[[TTA]] is a new lossless codec developed by a team of russian programmers.

=== TTA pros ===
* [[Open source]]
* Good efficiency
* Hardware support (obscure DVD player)
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support ([[ID3]])
* [[ReplayGain]] compatible
* Error robustness

=== TTA cons ===
* No streaming support
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* No pipe support

=== TTA Other features ===
* Fits the [[Matroska]] container

== WavPack (WV) ==
http://www.wavpack.com/

[[WavPack]] is a fast and featureful lossless codec developed by David Bryant.

=== WV pros ===
* [[Open source]]
* Very fast decoding
* Very fast encoding
* Good efficiency
* Error robustness
* Streaming support
* Hardware support ([http://www.rockbox.org/ RockBox])
* Supports [[multichannel]] audio and [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3v1]], [[APE tags]])
* Supports [[RIFF]] chunks
* Ability to create self extracting files for Win32 platform
* Pipe support
* Good software support
* [[ReplayGain]] compatible

=== WV cons ===
* Limited hardware player support

=== WV Other features ===
* Supports 32bit float streams
* Supports embedded CUE sheets
* Includes MD5 hashes for quick integrity checking
* Can encode in both symmetrical and asymmetrical modes.
* Fits the [[Matroska]] container

== Windows Media Audio Lossless (WMAL) ==
http://www.microsoft.com/windows/windowsmedia/9series/codecs/audio.aspx

WMA Lossless is the lossless codec developed by Microsoft to be featured in their Windows Media codec portfolio.

=== WMAL pros ===
* Streaming support
* Very good software support
* Hardware support (All Microsoft Zunes though older models may need firmware updates, also supported by some non-Microsoft devices like the [http://en.wikipedia.org/wiki/Gigabeat Gigabeat V and S line from Toshiba].
* Supports [[multichannel]] audio and [[high resolution]]s.
* Tagging support (proprietary)
* Pipe support

=== WMAL cons ===
* Closed source
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* Doesn't support [[ReplayGain]]

=== WMAL Other features ===
* Fits the [[ASF]] container

== Oddball Formats ==
There are several old lossless formats that aren't being featured in the article above. Reasons are: lack of widespread support, lack of features, bad efficiency and, most importantly, it seems no one is really interested in them.

Most of those would have disappeared by now, but they are being preserved for posterity at [[User:Rjamorim|rjamorim]]'s

Advanced Digital Audio (ADA)

Bonk

Marian's a-Pac

AudioZip

Dakx WAV

Entis Lab MIO

LiteWave

Pegasus SPS

RK Audio (RKAU)

Sonarc

VocPack

WavArc

WaveZip/MUSICompress

== See also ==
* [[Lossless]]

== External links ==
=== Other lossless compressions comparisons ===
''Sorted based on last '''update''' date.''

* [http://www.icer.nl/losslesstest/ Martijn van Beurden's comparison] - tries to compare all codecs and settings with a balanced pool of music (last updated 2013-08-10)
* [http://synthetic-soul.co.uk/comparison/lossless/ Synthetic Soul's comparison] (last update 2007-07-28)
* <s>Johan De Bock's speed oriented comparison</s> - best choices speedwise are indicated in green, mostly electronic music (last updated 2006-07-22)
* <s>Hans Heijden's</s> -- used as reference to build the table (last updated 2006-07-07)
* [http://synthetic-soul.co.uk/comparison/josef/ Josef Pohm's comparison, hosted by Synthetic Soul] (last update 2006-05-29)
* [http://www.bobulous.org.uk/misc/lossless_audio_2006.html Bobulous' lossless audio comparison] — a look at six lossless formats in terms of speed and file size (last updated 2006-05-22)
* <s>Jhan De Bock's size oriented comparison</s> - aimed only at the maximum compression setting for each codec (based on a somewhat limited set of samples, however) (last updated 2006-05-19)
* <s>Gruboolez'</s> -- comparing only classical music (last updated 2005-02-27)
* [http://members.home.nl/w.speek/comparison.htm Speek's] (last updated 2005-02-07)

=== More on lossless compressions ===
* [http://web.archive.org/web/20080731103800/http://www.losslessaudioblog.com/ The Lossless Audio Blog], retrieved from archive.org - by windmiller, is a reliable and complete source of news about lossless compression.
* Go to the [http://www.hydrogenaudio.org/forums/index.php?showtopic=33226 Hydrogenaudio thread] to discuss this article.

[[Category:Guides]]

Lossless comparison

2014-04-01T21:13:35Z

94.209.155.125: Added error handling for ALAC and an explanation

The '''lossless comparison page''' aims to gather information about lossless codecs available so users can make an informed decision as to what lossless codec to choose for their needs.

== Introduction ==
Given the enormous amount of [[lossless]] audio compressor choices available, it is a very difficult task to choose the one most suited for each person's needs.

Several people only take into consideration compression performance when choosing a codec. But as the following table and article shows, there are several other features worth taking into consideration when making that choice.

For example, users wanting good multiplatform compatibility and robustness (e.g., people sharing live recordings) would favour [[WavPack]] or [[FLAC]]. Another user, looking for the very highest compression available, would go with [[OptimFROG]]. Someone wanting portable support would use [[FLAC]] or [[ALAC]], and so on.

En fin, this is not a matter worth getting too worked up about. If you later find out the codec you chose isn't the best for your needs, you can just transcompress to another format, without risk of losing quality.

'''Note:''' for latest comparison of lossless compression, scroll down to the [[Lossless comparison#External links|Links section of this page]].

== Comparison Table ==


{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | FLAC
| width="95px" style="background: #00FFFF" | WavPack
| width="95px" style="background: #00FFFF" | TAK
| width="95px" style="background: #00FFFF" | Monkey's
| width="95px" style="background: #00FFFF" | OptimFROG
| width="95px" style="background: #00FFFF" | ALAC
| width="95px" style="background: #00FFFF" | WMA
|-
|align="left" style="background: #FFFF99" | Encoding speed*
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #CCFFCC" | fast
| style="background: #CCFFCC" | fast
|-
|align="left" style="background: #FFFF99" | Decoding speed*
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #00FF00" | very fast
| style="background: #FF9900" | slow
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
|-
|align="left" style="background: #FFFF99" | Compression*
| style="background: #CCFFCC" | 57.0%
| style="background: #CCFFCC" | 57.1%
| style="background: #00FF00" | 56.0%
| style="background: #00FF00" | 55.1%
| style="background: #00FF00" | 54.6%
| style="background: #CCFFCC" | 57.8%
| style="background: #FF9900" | 58.4%
|-
|align="left" style="background: #FFFF99" | Flexibility**
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|style="background: #FFFFFF" |  
|-
|align="left" style="background: #FFFF99" | Error handling***
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Tagging
| style="background: #00FF00" | Vorbis tags
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | APEv2 (exp.)
| style="background: #00FF00" | ID3/APE
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | iTunes
| style="background: #CCFFCC" | ASF
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #00FF00" | very good
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #CCFFCC" | good
| style="background: #FF9900" | limited
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | LossyWAV
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FFFFFF" | sort of
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux Wine
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Mac
|}

''(table continued below)''

{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | Shorten
| width="95px" style="background: #00FFFF" | LA
| width="95px" style="background: #00FFFF" | TTA
| width="95px" style="background: #00FFFF" | MPEG-4 ALS
| width="95px" style="background: #00FFFF" | MPEG-4 SLS
| width="95px" style="background: #00FFFF" | Real Lossless
|-
| align="left" style="background: #FFFF99" | Encoding speed*
| style="background: #00FF00" | very fast
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
| style="background: #FF9900" | slow
| style="background: #FF9900" | slow
|-
| align="left" style="background: #FFFF99" | Decoding speed*
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | very slow
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #00FF00" | very fast
|-
| align="left" style="background: #FFFF99" | Compression*
| style="background: #FF9900" | 62.3%
| style="background: #00FF00" | 53.3%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | 56.6%
| style="background: #CCFFCC" | ?
| style="background: #CCFFCC" | ~56%
|-
| align="left" style="background: #FFFF99" | Flexibility**
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|! style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Error handling
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Tagging
| style="background: #FF9900" | no
| style="background: #CCFFCC" | ID3v1
| style="background: #CCFFCC" | ID3
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | proprietary
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #CCFFCC" | LossyWAV
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #FF9900" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
|}

<nowiki>*</nowiki> The Compression ratio is calculated with the division of compressed size by uncompressed size * 100. So, lower is better. Encoding speed, Decoding speed and Compression ratio are based on each encoder's default settings and are taken from the most recent lossless codec comparison mentioned at the [[Lossless_comparison#Other_lossless_compressions_comparisons|links section of this page]]. Encoding speed is very fast if > 150x, fast if >75x, average if >40x, slow if >20x, very slow if <20x. Decoding speed is similar but thresholds are doubled, i.e., very fast if >300x, fast if >150x etc. Thresholds for compression are at 56% and 58%

<nowiki>**</nowiki> Flexibility refers to the amount of encoding choices offered to the users (Fast/low compression, Slow/high compression and everything inbetween)

<nowiki>***</nowiki> Error handling means that a codec can detect a corruption in a file and warn the user about it, but still decode most of the file, only leaving a small gap of silence where the error was detected. Corruption in this sense means bits that are flipped, not removed

These are the most popular lossless codecs, in alphabetical order:

== Apple Lossless Audio Codec (ALAC) ==
http://www.apple.com/itunes/import.html

[[ALAC]] is a codec developed by Apple for usage in [[Apple iPod|iPod]] and AirPort Express.

=== ALAC pros ===
* Very fast decoding
* [[Open source]] (encoding and decoding via FFmpeg and [[CueTools|CUETools]], decoding only via [http://craz.net/programs/itunes/alac.html a standalone decoder])
* Hardware support ([[Apple iPod|iPod]], AirPort Express)
* Streaming support
* Tagging support (QT tags)
* Excellent hardware-software-lossy format integration with [[iTunes]]/iPod.
* Supports [[multichannel]] audio and [[high resolution]]s

=== ALAC cons ===
* Limited software support
* No hybrid/lossy mode

=== ALAC Other features ===
* Fits in the [[MP4]] container
* Can be used with the AirPort Express gadget

== Free Lossless Audio Codec (FLAC) ==
https://xiph.org/flac/

[[FLAC]] is a lossless codec developed by Josh Coalson. It's part of the Xiph multimedia portfolio, along with [[Ogg]], [[Vorbis]], [[Speex]] and [[Theora]].

=== FLAC pros ===
* [[Open source]]
* Very fast decoding
* Fast encoding
* Hardware support ([[Rio Karma|Karma]], Phatbox, etc.)
* Very good software support
* Error robustness
* Streaming support
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support (FLAC tags)
* Supports [[RIFF]] chunks
* Pipe support
* [[ReplayGain]] compatible

=== FLAC cons ===
* No hybrid/lossy mode
* No support in iTunes (or other Apple products)

=== FLAC Other features ===
* Supports embedded CUE sheets (with [http://flac.sourceforge.net/faq.html#general__no_cuesheet_tags limitations])
* Includes MD5 hashes for quick integrity checking
* Fits the [[Ogg]] and [[Matroska]] containers

== LosslessAudio (LA) ==
http://www.lossless-audio.com/

[[LA]] is a lossless codec developed by Michael Bevin.

=== LA pros ===
* Very high compression
* Tagging support ([[ID3v1]])
* Supports [[RIFF]] chunks
* Pipe support

=== LA cons ===
* Closed source
* Very slow encoding and decoding
* Doesn't support [[multichannel]] audio and [[high resolution]]s
* No hardware support
* No hybrid/lossy mode
* Bad software support
* Doesn't support [[ReplayGain]]

'''''It's important to mention that the LA foobar plugin is buggy and doesn't produce lossless streams!'''''

== Lossless Predictive Audio Coder (LPAC) ==
* [http://www.nue.tu-berlin.de/menue/mitarbeiter/ehemalige_mitarbeiter/tilman_liebchen/lpac_-_lossless_audio_codec_for_windows_and_linux/ LPAC website]

[[Lossless Predictive Audio Coder]] (LPAC) is a lossless codec developed by Tilman Liebchen. Development of it has been halted in favour of development of [[MPEG-4]] ALS.

=== LPAC pros ===
* Reasonable compression ratios
* [[High resolution]] audio support
* Supports [[RIFF]] chunks

=== LPAC cons ===
* Closed source
* No error robustness
* Slow seeking
* No tagging
* No [[multichannel]] support
* No hybrid/lossy mode
* No hardware support
* Doesn't support [[ReplayGain]]

== Monkey's Audio (APE) ==
http://www.monkeysaudio.com/

[[Monkey's Audio]] is a very efficient lossless compressor developed by Matt Ashland.

=== APE pros ===
* High efficiency
* Good software support
* Simple and user friendly. Official GUI provided.
* Java version (multiplatform)
* Tagging support ([[ID3v1]], [[APE tags]])
* [[High resolution]] audio support
* Supports [[RIFF]] chunks (only in the GUI encoder)
* Pipe support (only in a [http://www.etree.org/shnutils/shntool/ special] version)

=== APE cons ===
* Problematic license (source provided, no modification or redistribution rights)
* No [[multichannel]] support
* No error robustness
* No hybrid/lossy mode
* Limited hardware support (Rockbox, some Cowon players); poor battery life due to complicated decoding [http://www.rockbox.org/wiki/SoundCodecMonkeysAudio MP3 player benchmarks]
* Higher compression levels are extremely CPU intensive
* Doesn't support [[ReplayGain]]

=== APE Other features ===
* Includes MD5 hashes for quick integrity checking
* Supports APL image link files (similar to CUE sheets)

== MPEG-4 SLS ==
MPEG-4 SLS allows audio encoding from lossless scalable to [[AAC]].

=== SLS pros ===
* Transcoding to standard AAC or any higher lossy bitrate at the speed of copying a file
* Scalable decoding from lossless, to any bitrate down to the AAC core track
* Best lossless compression available when you count the AAC track (~5% gain over any other lossless compression + AAC)
* [[High resolution]] audio support
* Multi channel audio support
* [[Open source]] (MPEG-4 Reference code)
* Embedded in standard MP4 files, so supports same tagging and ReplayGain features as AAC does.

=== SLS cons ===
* No usable software available yet
* Pure lossless compression not the best there is
* Seems to be slow in encoding and decoding, but we have to wait for released software

=== SLS Other features ===
* Transform based lossless codec with optional LC AAC core track

== OptimFROG (OFR) ==
http://www.losslessaudio.org/

[[OptimFROG]] is a lossless format developed by Florin Ghido to become the champion in audio compression.

=== OFR pros ===
* Very high compression
* Good software support
* Error robustness
* Streaming support
* Supports [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3]], [[APE tags]])
* Supports [[RIFF]] chunks
* [[ReplayGain]] compatible

=== OFR cons ===
* Closed source
* No [[multichannel]] audio support
* No hardware support
* Quite slow decoding

=== OFR Other features ===
* Supports 32bit float streams
* Includes MD5 hashes for quick integrity checking

== RealAudio Lossless (RAL) ==
http://www.realnetworks.com/products/codecs/realaudio.html

RealAudio lossless is the lossless codec developed by Real Networks for their multimedia portfolio

=== RAL pros ===
* Very fast decoding
* Streaming support
* Tagging support (proprietary)

=== RAL cons ===
* Closed source
* No [[multichannel]] and [[high resolution]] audio support
* Little software support (Real Player)
* No hardware support
* Compression efficiency not on par with other lossless codecs
* No hybrid/lossy mode
* No pipe support
* Doesn't support [[ReplayGain]]

== Shorten (SHN) ==
http://www.etree.org/shnutils/shorten/

[[Shorten]] is a very old and featureless lossless codec developed by Tony Robinson at SoftSound.

=== SHN pros ===
* [[Open source]]
* Fast decoding
* Very good software support
* Supports [[RIFF]] chunks
* Pipe support

=== SHN cons ===
* Quite inefficient
* No [[multichannel]] or [[high resolution]] audio support
* No hybrid/lossy mode
* No error robustness
* Not streamable
* No hardware support
* No native tagging
* Doesn't support [[ReplayGain]]

== True Audio (TTA) ==
http://www.true-audio.com/

[[TTA]] is a new lossless codec developed by a team of russian programmers.

=== TTA pros ===
* [[Open source]]
* Good efficiency
* Hardware support (obscure DVD player)
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support ([[ID3]])
* [[ReplayGain]] compatible
* Error robustness

=== TTA cons ===
* No streaming support
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* No pipe support

=== TTA Other features ===
* Fits the [[Matroska]] container

== WavPack (WV) ==
http://www.wavpack.com/

[[WavPack]] is a fast and featureful lossless codec developed by David Bryant.

=== WV pros ===
* [[Open source]]
* Very fast decoding
* Very fast encoding
* Good efficiency
* Error robustness
* Streaming support
* Hardware support ([http://www.rockbox.org/ RockBox])
* Supports [[multichannel]] audio and [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3v1]], [[APE tags]])
* Supports [[RIFF]] chunks
* Ability to create self extracting files for Win32 platform
* Pipe support
* Good software support
* [[ReplayGain]] compatible

=== WV cons ===
* Limited hardware player support

=== WV Other features ===
* Supports 32bit float streams
* Supports embedded CUE sheets
* Includes MD5 hashes for quick integrity checking
* Can encode in both symmetrical and asymmetrical modes.
* Fits the [[Matroska]] container

== Windows Media Audio Lossless (WMAL) ==
http://www.microsoft.com/windows/windowsmedia/9series/codecs/audio.aspx

WMA Lossless is the lossless codec developed by Microsoft to be featured in their Windows Media codec portfolio.

=== WMAL pros ===
* Streaming support
* Very good software support
* Hardware support (All Microsoft Zunes though older models may need firmware updates, also supported by some non-Microsoft devices like the [http://en.wikipedia.org/wiki/Gigabeat Gigabeat V and S line from Toshiba].
* Supports [[multichannel]] audio and [[high resolution]]s.
* Tagging support (proprietary)
* Pipe support

=== WMAL cons ===
* Closed source
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* Doesn't support [[ReplayGain]]

=== WMAL Other features ===
* Fits the [[ASF]] container

== Oddball Formats ==
There are several old lossless formats that aren't being featured in the article above. Reasons are: lack of widespread support, lack of features, bad efficiency and, most importantly, it seems no one is really interested in them.

Most of those would have disappeared by now, but they are being preserved for posterity at [[User:Rjamorim|rjamorim]]'s

Advanced Digital Audio (ADA)

Bonk

Marian's a-Pac

AudioZip

Dakx WAV

Entis Lab MIO

LiteWave

Pegasus SPS

RK Audio (RKAU)

Sonarc

VocPack

WavArc

WaveZip/MUSICompress

== See also ==
* [[Lossless]]

== External links ==
=== Other lossless compressions comparisons ===
''Sorted based on last '''update''' date.''

* [http://www.icer.nl/losslesstest/ Martijn van Beurden's comparison] - tries to compare all codecs and settings with a balanced pool of music (last updated 2013-08-10)
* [http://synthetic-soul.co.uk/comparison/lossless/ Synthetic Soul's comparison] (last update 2007-07-28)
* <s>Johan De Bock's speed oriented comparison</s> - best choices speedwise are indicated in green, mostly electronic music (last updated 2006-07-22)
* <s>Hans Heijden's</s> -- used as reference to build the table (last updated 2006-07-07)
* [http://synthetic-soul.co.uk/comparison/josef/ Josef Pohm's comparison, hosted by Synthetic Soul] (last update 2006-05-29)
* [http://www.bobulous.org.uk/misc/lossless_audio_2006.html Bobulous' lossless audio comparison] — a look at six lossless formats in terms of speed and file size (last updated 2006-05-22)
* <s>Jhan De Bock's size oriented comparison</s> - aimed only at the maximum compression setting for each codec (based on a somewhat limited set of samples, however) (last updated 2006-05-19)
* <s>Gruboolez'</s> -- comparing only classical music (last updated 2005-02-27)
* [http://members.home.nl/w.speek/comparison.htm Speek's] (last updated 2005-02-07)

=== More on lossless compressions ===
* [http://web.archive.org/web/20080731103800/http://www.losslessaudioblog.com/ The Lossless Audio Blog], retrieved from archive.org - by windmiller, is a reliable and complete source of news about lossless compression.
* Go to the [http://www.hydrogenaudio.org/forums/index.php?showtopic=33226 Hydrogenaudio thread] to discuss this article.

[[Category:Guides]]

Lossless comparison

2013-05-01T07:50:19Z

94.209.155.125: Added my own (Martijn's) lossless comparison to the list and updated speeds and compressiong in the table. LPAC was removed from the table because it is no longer developed

The '''lossless comparison page''' aims to gather information about lossless codecs available so users can make an informed decision as to what lossless codec to choose for their needs.

== Introduction ==
Given the enormous amount of [[lossless]] audio compressor choices available, it is a very difficult task to choose the one most suited for each person's needs.

Several people only take into consideration compression performance when choosing a codec. But as the following table and article shows, there are several other features worth taking into consideration when making that choice.

For example, users wanting good multiplatform compatibility and robustness (E.G, people sharing live recordings) would favour [[WavPack]] or [[FLAC]]. Another user, looking for the very highest compression available, would go with [[OptimFROG]]. Someone wanting portable support would use [[FLAC]] or [[ALAC]], and so on.

En fin, this is not a matter worth getting too worked up about. If you later find out the codec you chose isn't the best for your needs, you can just transcompress to another format, without risk of losing quality.

'''Note:''' for latest comparison of lossless compression, scroll down to the [[Lossless comparison#External links|Links section of this page]].

== Comparison Table ==


{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | FLAC
| width="95px" style="background: #00FFFF" | WavPack
| width="95px" style="background: #00FFFF" | TAK
| width="95px" style="background: #00FFFF" | Monkey's
| width="95px" style="background: #00FFFF" | OptimFROG
| width="95px" style="background: #00FFFF" | ALAC
| width="95px" style="background: #00FFFF" | WMA
|-
|align="left" style="background: #FFFF99" | Encoding speed
| style="background: #CCFFCC" | fast
| style="background: #00FF00" | very fast
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
|-
|align="left" style="background: #FFFF99" | Decoding speed
| style="background: #00FF00" | very fast
| style="background: #CCFFCC" | fast
| style="background: #00FF00" | very fast
| style="background: #FFFFFF" | average
| style="background: #FF9900" | slow
| style="background: #CCFFCC" | fast
| style="background: #CCFFCC" | fast
|-
|align="left" style="background: #FFFF99" | Compression*
| style="background: #CCFFCC" | 55.7%
| style="background: #CCFFCC" | 55.7%
| style="background: #00FF00" | 53.9%
| style="background: #00FF00" | 53.7%
| style="background: #00FF00" | 53.2%
| style="background: #CCFFCC" | 56.7%
| style="background: #CCFFCC" | 57.1%
|-
|align="left" style="background: #FFFF99" | Flexibility**
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|style="background: #FFFFFF" |  
|-
|align="left" style="background: #FFFF99" | Error handling
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
|align="left" style="background: #FFFF99" | Tagging
| style="background: #00FF00" | Vorbis tags
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | APEv2 (exp.)
| style="background: #00FF00" | ID3/APE
| style="background: #00FF00" | ID3/APE
| style="background: #CCFFCC" | iTunes
| style="background: #CCFFCC" | ASF
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #00FF00" | very good
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #CCFFCC" | good
| style="background: #FF9900" | limited
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
| style="background: #FFFFFF" | average
| style="background: #FFFFFF" | average
| style="background: #CCFFCC" | good
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FFFFFF" | sort of
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes (third-party)
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux Wine
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Mac
|}

''(table continued below)''

{| cellspacing="2" style="text-align:center; border:1px solid blue;"
|width="120px"|'''Features'''
| width="95px" style="background: #00FFFF" | Shorten
| width="95px" style="background: #00FFFF" | LA
| width="95px" style="background: #00FFFF" | TTA
| width="95px" style="background: #00FFFF" | MPEG-4 ALS
| width="95px" style="background: #00FFFF" | MPEG-4 SLS
| width="95px" style="background: #00FFFF" | Real Lossless
|-
| align="left" style="background: #FFFF99" | Encoding speed
| style="background: #00FF00" | very fast
| style="background: #FF9900" | very slow
| style="background: #CCFFCC" | fast
| style="background: #FFFFFF" | average
| style="background: #FF9900" | slow
| style="background: #FF9900" | slow
|-
| align="left" style="background: #FFFF99" | Decoding speed
| style="background: #00FF00" | very fast
| style="background: #FF9900" | slow
| style="background: #CCFFCC" | fast
| style="background: #CCFFCC" | fast
| style="background: #FF9900" | slow
| style="background: #00FF00" | very fast
|-
| align="left" style="background: #FFFF99" | Compression*
| style="background: #FF9900" | 60.9%
| style="background: #00FF00" | 52.1%
| style="background: #CCFFCC" | 55.3%
| style="background: #CCFFCC" | 55.1%
| style="background: #CCFFCC" | ?
| style="background: #CCFFCC" | 55.4%
|-
| align="left" style="background: #FFFF99" | Flexibility**
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
|! style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Error handling
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Seeking
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Tagging
| style="background: #FF9900" | no
| style="background: #CCFFCC" | ID3v1
| style="background: #CCFFCC" | ID3
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #CCFFCC" | proprietary
|-
| align="left" style="background: #FFFF99" | Hardware support
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | limited
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Software support
| style="background: #00FF00" | very good
| style="background: #FF9900" | bad
| style="background: #FFFFFF" | average
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
| style="background: #FF9900" | bad
|-
| align="left" style="background: #FFFF99" | Hybrid/lossy
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | ReplayGain
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | RIFF chunks
| style="background: #FF9900" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
|-
| align="left" style="background: #FFFF99" | Streaming
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
|-
| align="left" style="background: #FFFF99" | Pipe support
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #FFFFFF" |  
| style="background: #FFFFFF" |  
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Open source
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | Multichannel
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | High resolution
| style="background: #FF9900" | no
| style="background: #FF9900" | no
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #00FF00" | yes
| style="background: #FF9900" | no
|-
| align="left" style="background: #FFFF99" | OS support
| style="background: #00FF00" | All
| style="background: #CCFFCC" | Win/Linux
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | All
| style="background: #00FF00" | Win/Mac/Linux
|}

<nowiki>*</nowiki> The Compression ratio is calculated with the division of compressed size by uncompressed size * 100. So, lower is better.

Encoding speed, Decoding speed and Compression ratio are based on each encoder's default settings.

<nowiki>**</nowiki> Flexibility refers to the amount of encoding choices offered to the users (Fast/low compression, Slow/high compression and everything inbetween)

These are the most popular lossless codecs, in alphabetical order:

== Apple Lossless Audio Codec (ALAC) ==
http://www.apple.com/itunes/import.html

[[ALAC]] is a codec developed by Apple for usage in [[Apple iPod|iPod]] and AirPort Express.

=== ALAC pros ===
* Very fast decoding
* [[Open source]] (encoding and decoding via FFmpeg and [[CueTools|CUETools]], decoding only via [http://craz.net/programs/itunes/alac.html a standalone decoder])
* Hardware support ([[Apple iPod|iPod]], AirPort Express)
* Streaming support
* Tagging support (QT tags)
* Excellent hardware-software-lossy format integration with [[iTunes]]/iPod.
* Supports [[multichannel]] audio and [[high resolution]]s

=== ALAC cons ===
* Limited software support
* No hybrid/lossy mode

=== ALAC Other features ===
* Fits in the [[MP4]] container
* Can be used with the AirPort Express gadget

== Free Lossless Audio Codec (FLAC) ==
http://flac.sourceforge.net/

[[FLAC]] is a lossless codec developed by Josh Coalson. It's part of the Xiph multimedia portfolio, along with [[Ogg]], [[Vorbis]], [[Speex]] and [[Theora]].

=== FLAC pros ===
* [[Open source]]
* Very fast decoding
* Fast encoding
* Hardware support ([[Rio Karma|Karma]], Phatbox, etc.)
* Very good software support
* Error robustness
* Streaming support
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support (FLAC tags)
* Supports [[RIFF]] chunks
* Pipe support
* [[ReplayGain]] compatible

=== FLAC cons ===
* No hybrid/lossy mode

=== FLAC Other features ===
* Supports embedded CUE sheets (with [http://flac.sourceforge.net/faq.html#general__no_cuesheet_tags limitations])
* Includes MD5 hashes for quick integrity checking
* Fits the [[Ogg]] and [[Matroska]] containers

== LosslessAudio (LA) ==
http://www.lossless-audio.com/

[[LA]] is a lossless codec developed by Michael Bevin.

=== LA pros ===
* Very high compression
* Tagging support ([[ID3v1]])
* Supports [[RIFF]] chunks
* Pipe support

=== LA cons ===
* Closed source
* Very slow encoding and decoding
* Doesn't support [[multichannel]] audio and [[high resolution]]s
* No hardware support
* No hybrid/lossy mode
* Bad software support
* Doesn't support [[ReplayGain]]

'''''It's important to mention that the LA foobar plugin is buggy and doesn't produce lossless streams!'''''

== Lossless Predictive Audio Coder (LPAC) ==
* [http://www.nue.tu-berlin.de/menue/mitarbeiter/ehemalige_mitarbeiter/tilman_liebchen/lpac_-_lossless_audio_codec_for_windows_and_linux/ LPAC website]

[[Lossless Predictive Audio Coder]] (LPAC) is a lossless codec developed by Tilman Liebchen. Development of it has been halted in favour of development of [[MPEG-4]] ALS.

=== LPAC pros ===
* Reasonable compression ratios
* [[High resolution]] audio support
* Supports [[RIFF]] chunks

=== LPAC cons ===
* Closed source
* No error robustness
* Slow seeking
* No tagging
* No [[multichannel]] support
* No hybrid/lossy mode
* No hardware support
* Doesn't support [[ReplayGain]]

== Monkey's Audio (APE) ==
http://www.monkeysaudio.com/

[[Monkey's Audio]] is a very efficient lossless compressor developed by Matt Ashland.

=== APE pros ===
* [[Open source]]
* High efficiency
* Good software support
* Simple and user friendly. Official GUI provided.
* Java version (multiplatform)
* Tagging support ([[ID3v1]], [[APE tags]])
* [[High resolution]] audio support
* Supports [[RIFF]] chunks (only in the GUI encoder)
* Pipe support (only in a [http://www.etree.org/shnutils/shntool/ special] version)

=== APE cons ===
* No [[multichannel]] support
* No error robustness
* No hybrid/lossy mode
* Limited hardware support (Rockbox, some Cowon players); poor battery life due to complicated decoding [http://www.rockbox.org/wiki/SoundCodecMonkeysAudio MP3 player benchmarks]
* Higher compression levels are extremely CPU intensive
* Doesn't support [[ReplayGain]]

=== APE Other features ===
* Includes MD5 hashes for quick integrity checking
* Supports APL image link files (similar to CUE sheets)

== MPEG-4 SLS ==
MPEG-4 SLS allows audio encoding from lossless scalable to [[AAC]].

=== SLS pros ===
* Transcoding to standard AAC or any higher lossy bitrate at the speed of copying a file
* Scalable decoding from lossless, to any bitrate down to the AAC core track
* Best lossless compression available when you count the AAC track (~5% gain over any other lossless compression + AAC)
* [[High resolution]] audio support
* Multi channel audio support
* [[Open source]] (MPEG-4 Reference code)
* Embedded in standard MP4 files, so supports same tagging and ReplayGain features as AAC does.

=== SLS cons ===
* No usable software available yet
* Pure lossless compression not the best there is
* Seems to be slow in encoding and decoding, but we have to wait for released software

=== SLS Other features ===
* Transform based lossless codec with optional LC AAC core track

== OptimFROG (OFR) ==
http://www.losslessaudio.org/

[[OptimFROG]] is a lossless format developed by Florin Ghido to become the champion in audio compression.

=== OFR pros ===
* Very high compression
* Good software support
* Error robustness
* Streaming support
* Supports [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3]], [[APE tags]])
* Supports [[RIFF]] chunks
* [[ReplayGain]] compatible

=== OFR cons ===
* Closed source
* No [[multichannel]] audio support
* No hardware support
* Quite slow decoding

=== OFR Other features ===
* Supports 32bit float streams
* Includes MD5 hashes for quick integrity checking

== RealAudio Lossless (RAL) ==
http://www.realnetworks.com/products/codecs/realaudio.html

RealAudio lossless is the lossless codec developed by Real Networks for their multimedia portfolio

=== RAL pros ===
* Very fast decoding
* Streaming support
* Tagging support (proprietary)

=== RAL cons ===
* Closed source
* No [[multichannel]] and [[high resolution]] audio support
* Little software support (Real Player)
* No hardware support
* Compression efficiency not on par with other lossless codecs
* No hybrid/lossy mode
* No pipe support
* Doesn't support [[ReplayGain]]

== Shorten (SHN) ==
http://www.etree.org/shnutils/shorten/

[[Shorten]] is a very old and featureless lossless codec developed by Tony Robinson at SoftSound.

=== SHN pros ===
* [[Open source]]
* Fast decoding
* Very good software support
* Supports [[RIFF]] chunks
* Pipe support

=== SHN cons ===
* Quite inefficient
* No [[multichannel]] or [[high resolution]] audio support
* No hybrid/lossy mode
* No error robustness
* Not streamable
* No hardware support
* No native tagging
* Doesn't support [[ReplayGain]]

== True Audio (TTA) ==
http://www.true-audio.com/

[[TTA]] is a new lossless codec developed by a team of russian programmers.

=== TTA pros ===
* [[Open source]]
* Good efficiency
* Hardware support (obscure DVD player)
* Supports [[multichannel]] audio and [[high resolution]]s
* Tagging support ([[ID3]])
* [[ReplayGain]] compatible
* Error robustness

=== TTA cons ===
* No streaming support
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* No pipe support

=== TTA Other features ===
* Fits the [[Matroska]] container

== WavPack (WV) ==
http://www.wavpack.com/

[[WavPack]] is a fast and featureful lossless codec developed by David Bryant.

=== WV pros ===
* [[Open source]]
* Very fast decoding
* Very fast encoding
* Good efficiency
* Error robustness
* Streaming support
* Hardware support ([http://www.rockbox.org/ RockBox])
* Supports [[multichannel]] audio and [[high resolution]]s
* Hybrid/lossy mode
* Tagging support ([[ID3v1]], [[APE tags]])
* Supports [[RIFF]] chunks
* Ability to create self extracting files for Win32 platform
* Pipe support
* Good software support
* [[ReplayGain]] compatible

=== WV cons ===
* Limited hardware player support

=== WV Other features ===
* Supports 32bit float streams
* Supports embedded CUE sheets
* Includes MD5 hashes for quick integrity checking
* Can encode in both symmetrical and assymmetrical modes.
* Fits the [[Matroska]] container

== Windows Media Audio Lossless (WMAL) ==
http://www.microsoft.com/windows/windowsmedia/9series/codecs/audio.aspx

WMA Lossless is the lossless codec developed by Microsoft to be featured in their Windows Media codec portfolio.

=== WMAL pros ===
* Streaming support
* Very good software support
* Hardware support (All Microsoft Zunes though older models may need firmware updates, also supported by some non-Microsoft devices like the [http://en.wikipedia.org/wiki/Gigabeat Gigabeat V and S line from Toshiba].
* Supports [[multichannel]] audio and [[high resolution]]s.
* Tagging support (proprietary)
* Pipe support

=== WMAL cons ===
* Closed source
* No hybrid/lossy mode
* Doesn't support [[RIFF]] chunks
* Doesn't support [[ReplayGain]]

=== WMAL Other features ===
* Fits the [[ASF]] container

== Oddball Formats ==
There are several old lossless formats that aren't being featured in the article above. Reasons are: lack of widespread support, lack of features, bad efficiency and, most importantly, it seems no one is really interested in them.

Most of those would have disappeared by now, but they are being preserved for posterity at [[User:Rjamorim|rjamorim]]'s

Advanced Digital Audio (ADA)

Bonk

Marian's a-Pac

AudioZip

Dakx WAV

Entis Lab MIO

LiteWave

Pegasus SPS

RK Audio (RKAU)

Sonarc

VocPack

WavArc

WaveZip/MUSICompress

== See also ==
* [[Lossless]]

== External links ==
=== Other lossless compressions comparisons ===
''Sorted based on last '''update''' date.''

* [http://www.icer.nl/losslesstest/ Martijn van Beurden's comparison] - tries to compare all codecs and settings with a balanced pool of music (last updated 2013-03-19)
* [http://synthetic-soul.co.uk/comparison/lossless/ Synthetic Soul's comparison] (last update 2007-07-28)
* <s>Johan De Bock's speed oriented comparison</s> - best choices speedwise are indicated in green, mostly electronic music (last updated 2006-07-22)
* <s>Hans Heijden's</s> -- used as reference to build the table (last updated 2006-07-07)
* [http://synthetic-soul.co.uk/comparison/josef/ Josef Pohm's comparison, hosted by Synthetic Soul] (last update 2006-05-29)
* [http://www.bobulous.org.uk/misc/lossless_audio_2006.html Bobulous' lossless audio comparison] — a look at six lossless formats in terms of speed and file size (last updated 2006-05-22)
* <s>Jhan De Bock's size oriented comparison</s> - aimed only at the maximum compression setting for each codec (based on a somewhat limited set of samples, however) (last updated 2006-05-19)
* <s>Gruboolez'</s> -- comparing only classical music (last updated 2005-02-27)
* [http://members.home.nl/w.speek/comparison.htm Speek's] (last updated 2005-02-07)

=== More on lossless compressions ===
* <s>The Lossless Audio Blog</s> - by windmiller, is a reliable and complete source of news about lossless compression.
* Go to the [http://www.hydrogenaudio.org/forums/index.php?showtopic=33226 Hydrogenaudio thread] to discuss this article.

[[Category:Guides]]