PlexTools: Difference between revisions

From Hydrogenaudio Knowledgebase
No edit summary
 
No edit summary
Line 1: Line 1:
[http://www.plextools.com/ Plextools] is a freeware audio extraction software which uses Smart Advanced DAE Error Recovery Strategies. It relies on C2 error information reported by the drive to know when & where errors occurred, Plextools automatically corrects drive offsets, is extremely fast & is especially useful for recovering errors.
Only Plextor drives are supported by Plextools & ''any Plexwriter before the 12/10/32A or Plextor CD-ROM before & including the 40TS are not supported''. Although all Plextor drives will function with Plextools Advanced DAE, be aware that error reporting (and detection) will not be performed correctly with older, unsupported drives.
==Setup Guide==
==Setup Guide==


Line 174: Line 169:


5. In the '''Error Log''' tick box you select if you want Plextools to output a text file containing detailed information about if & when errors occurred, this is a user specific option however this option [[Image:Plex_DAE5.png|Plextools DAE]] ''is recommended (tick)'' so you can keep track the condition of your rips.
5. In the '''Error Log''' tick box you select if you want Plextools to output a text file containing detailed information about if & when errors occurred, this is a user specific option however this option [[Image:Plex_DAE5.png|Plextools DAE]] ''is recommended (tick)'' so you can keep track the condition of your rips.
==Start Digital Audio Extraction==
''under construction''
==Links==
[[http://www.plextools.com Plextools Home Page]]

Revision as of 12:15, 26 March 2005

Setup Guide

Start by opening Plextools & selecting Digital Audio Extraction in the lower left list box.


Output Path & Filename Options

Output Path & File Options are user specific, you may find a different output path & file name scheme works better for you. I will give an explanation of the options & also my suggestion. The Output Path can be found at the middle of the main window of Digital Audio Extraction

Plextools output path

You need to set an output path for the audio files Plextools will extract from your CD's, Plextools search create a folder for your rips, I'll place the folder on my desktop, and name it Plextools Rips, then Plextools save save it as the output path.

The Filename Options section is located at the top left of Digital Audio Extraction tab of Preferences.

Plextools filename

1. In Spaces you select if you want spaces in CD TEXT information to be; Included, Removed (no spaces) or replaced with underscores ( _ ) in the output. Plextools include include spaces is suggested. 2. In Filename construction you input how you want your album (folder) & tracks (file) to be named, you can use any combinations of filename codes to create your desired scheme, and If you don’t mind manually inputting the infomation CD types can also be useful for classifying your CD's. Plextools naming syntax is the suggested scheme.

Filename Codes

Input

Output

%N

Track number

%T

Track title

%A

Track artist

%C

Disc title

%I

ISRC code

%Y

Release year


3. In Get CD TEXT from you select where Plextools should get the information from; the CD (the physical Audio CD) or freedb (online database). Although you can always be sure that the CD TEXT in your Audio CD is correct (unlike freedb) very few CD’s contain CD TEXT. Plextools from CD is recommended that way Plextools will search the CD & then if no data is found it will use the freedb database.

Freedb

under construction


Advanced DAE Settings

Plextools has a powerful function that is not provided with standard audio extraction software: Audio Error Detection. It will allow detection of errors during the reading of audio tracks.

The Options section is at the bottom right of the main window of Digital Audio Extraction.

Plextools DAE

Using Audio error detection (tick) is highly recommended & is necessary for error recovery to function.


Plextools offers a choice of smart strategies that attempt to recover the original data. These strategies consist out of combinations of re-reading the data and changing the read speed. Depending on the type and severity of the damage, each strategy will give a different result.

DAE Error Recovery Options

Report errors only

This strategy can be used when the source disc is error-free or error correction is not necessary.

Reduce the speed upon error

When Uncorrectable Errors are found, the damaged area will be read at a lower speed in order to find an error-free reading.

Read again upon error

When Uncorrectable Errors are found, the damaged area will be read again for a number of times (Retries) at the selected speed in order to find an error-free reading.The optional Allow Speed Down can be used to achieve better results at a lower speed.

Recover the best sector (least errors)

When Uncorrectable Errors are found, the damaged area will be read again for a number of times (Retries) at the selected speed. When the errors stay, the sectors with the least errors will be used to re-assemble the original data.The optional Allow Speed Down can be used to achieve better results at lower speed

Recover the best bytes (least errors) per sector

When Uncorrectable Errors are found, the damaged area will be read again for a number of times (Retries) at the selected speed. When the errors stay, the bytes with the least errors will be used to re-assemble the original data.

Find the DAE Recovery section at the bottom left of Digital Audio Extraction tab of Preferences Plextools DAE

1. The options in this list are described in the DAE Error Recovery Options table, the Error Recovery Option you select will only effect speed when an error is encountered, & will have little to no impact on the accuracy of error reporting (and detection). Plextools DAE 5. Recover the best bytes (least errors) per sector is the most advanced & will yield best results for recovering errors, it is the recommended DAE Error Recovery Option.

2. In the Retries text box you input how many times Plextools will command the drive to re-read a position which contains an error, this will effect any DAE Error Recovery Option which performs (Retries). Plextools DAE maximum setting of 99 is recommended.

3.In the Maximum Errors list box you select how many errors Plextools will allow until it aborts extraction, this is a user specific option however Plextools DAE minimum option of 100 is recommend, if errors occur attempt some type of CD cleaning & retry, if errors are still preset you can select unlimited to force extraction.

4. In the Allow Speed Down tick box you select if will allow Plextools to speed down the drive in when it encounters an error, this will be done in sequence until the drive reaches its lowest speed or the errors are recovered, after the position is read the drive will be sped up again, this will effect any DAE Error Recovery option you select, and Plextools DAE is recommended (tick).

5. In the Error Log tick box you select if you want Plextools to output a text file containing detailed information about if & when errors occurred, this is a user specific option however this option Plextools DAE is recommended (tick) so you can keep track the condition of your rips.