Foobar2000:Resampler DSP (SSRC) (foo dsp ssrc): Difference between revisions

From Hydrogenaudio Knowledgebase
Line 30: Line 30:
This is a modified version of foo_dsp_ssrc that Otchan was created.
This is a modified version of foo_dsp_ssrc that Otchan was created.


SSRC parameters can be set finely.
SSRC parameters can be set finely. Of course, presets can also be used, in where Default is good enough for most purposes.
Of course, presets can also be used.


The conversion destination sample rate can be specified more than once.
The conversion destination sample rate can be specified on the left.
When more than one is specified, one is automatically selected according to the conversion source sample rate.
More than one can be specified, any of which is automatically selected according to the conversion source sample rate and the formats the output device supports.
If conversion is not necessary, conversion is not performed.
If conversion is not necessary, conversion is not performed.


Partial processing of upsampling was changed.
Some elements of the original SSRC up sampling are altered.
Aliasing to the high range by changing the cutoff frequency of the low pass filter
Namely the cutoff frequency of the low pass filter which affects Aliasing in high range to improve rejection.
The noise contained was fixed.


This plugin was created with the intention of using with KS output.
This plugin was created with the intention of using with XP/Vista KS output / Vista WASAPI / ASIO.


------------------------
------------------------


This plug-in performs sample rate conversion using SSRC as necessary.
This plug-in performs sample rate conversion using the original SSRC when necessary.
SSRC was created by Mr. Shibata, and it is compatible with high level conversion quality and low load
SSRC was created by Mr. Shibata, and it is compatible with high level conversion quality, with low load on CPU.
It is a feature.
This is new a feature.


When trying to reproduce sound of sample rate which hardware can not handle, kernel Miki
It is also useful for sample rate conversion of WAV files.
The sample rate conversion is performed automatically by Sir. However, this kernel
Since the quality of sample rate conversion by Kisar is not good, it causes deterioration of sound quality.
So, convert it to the sample rate that SSRC can handle beforehand
You will be able to reduce sound quality degradation.
 
It will also be useful for sample rate conversion of WAV files.


------------------------
------------------------
 
'''
Configuration
Configuration
 
'''
Display information on console
'''Display information on console''' - enables Conversion status can be shown via the console accessible via "View" "Console" in foobar2000.
In the case of
'''Sample rates (Hz)''' - Check all the sample rate that the hardware can handle.
Conversion status by this plug-in is output to the console.
'''AA [dB]''' - Anti-aliasing Rejection (applies to down sampling only)
Please refer to it when adjusting the setting.
Please be aware that the operation status of the kernel mixer is not understood.
In the standard state, the console can be called from "View" "Console".
 
Sample rates (Hz) - Check all the sample rate that the hardware can handle.
AA (dB) - Anti-aliasing Rejection (applies to down sampling only)
16 bit sound card 103 dB
16 bit sound card 103 dB
24-bit sound card 127 dB
24-bit sound card 127 dB


DF [Hz] - Always enabled depending on input/output combo - Its a High Pass Filter
'''DF [Hz]''' - Always enabled depending on input/output combo - Its a High Pass Filter


1M fs - Default SSRC algorithm filter is always enabled for down sampling.  
'''1M fs''' - Default SSRC algorithm filter is always enabled for down sampling.  
Otherwise a custom cutoff can be specified within the range specified below:
Otherwise a custom cutoff can be specified within the range specified below:
50 22.0 kHz (-3 dB)
50 22.0 kHz (-3 dB)
Line 83: Line 69:
8000 15.9 kHz (-3 dB)
8000 15.9 kHz (-3 dB)
16000 9.5 kHz (-3 dB)
16000 9.5 kHz (-3 dB)
When Up sampling this has little or no effect.
When Up sampling this has little if any effect.


The DF differs from the original SSRC.
The DF differs from the original SSRC algorithm.
The DF (Hz) in SSRCX is half that of the original plug-in.
The DF (Hz) in SSRCX is half that of the original plug-in.
For example, DF (Hz) = 50 for this plug-in is equivalent to DF = 100 for SSRC.
For example, DF (Hz) = 50 for this plug-in is equivalent to DF = 100 for SSRC.
Line 91: Line 77:
FFTFIRLIN - Leave at 1 unless otherwise required
FFTFIRLIN - Leave at 1 unless otherwise required
Its automatic and reflects AA and DF settings.
Its automatic and reflects AA and DF settings.
Presets - Default is good for general use.

Revision as of 16:55, 26 May 2017

Foobar2000_Logo.png

Description

  • Sample rate converter up to 192000Hz.

Link

The main SSRC has also been adapted to within the plugins listed below and should be compatible with foobar:

Resampler-V Available on https://sourceforge.net/projects/resamplerv/

SSRX Available here http://foobar2000.ru/forum/download/file.php?id=3645&filename=Foobar2000+Hi-Fi.7z

Screenshot: http://pds22.egloos.com/pds/201206/29/31/d0126831_4fed68b6a0ec6.jpg

Because the settings are very unclear in SSRC X, the file contains a read me. However that is encoded in non standard Standard-Japanese for MAC unicode. For convenience this has been converted and translated below;


Foo_dsp_ssrcX - 0.57


This is a modified version of foo_dsp_ssrc that Otchan was created.

SSRC parameters can be set finely. Of course, presets can also be used, in where Default is good enough for most purposes.

The conversion destination sample rate can be specified on the left. More than one can be specified, any of which is automatically selected according to the conversion source sample rate and the formats the output device supports. If conversion is not necessary, conversion is not performed.

Some elements of the original SSRC up sampling are altered. Namely the cutoff frequency of the low pass filter which affects Aliasing in high range to improve rejection.

This plugin was created with the intention of using with XP/Vista KS output / Vista WASAPI / ASIO.


This plug-in performs sample rate conversion using the original SSRC when necessary. SSRC was created by Mr. Shibata, and it is compatible with high level conversion quality, with low load on CPU. This is new a feature.

It is also useful for sample rate conversion of WAV files.


Configuration Display information on console - enables Conversion status can be shown via the console accessible via "View" "Console" in foobar2000. Sample rates (Hz) - Check all the sample rate that the hardware can handle. AA [dB] - Anti-aliasing Rejection (applies to down sampling only) 16 bit sound card 103 dB 24-bit sound card 127 dB

DF [Hz] - Always enabled depending on input/output combo - Its a High Pass Filter

1M fs - Default SSRC algorithm filter is always enabled for down sampling. Otherwise a custom cutoff can be specified within the range specified below: 50 22.0 kHz (-3 dB) 500 21.7 kHz (-3 dB) 2000 20.5 kHz (-3 dB) 4000 19.0 kHz (-3 dB) 8000 15.9 kHz (-3 dB) 16000 9.5 kHz (-3 dB) When Up sampling this has little if any effect.

The DF differs from the original SSRC algorithm. The DF (Hz) in SSRCX is half that of the original plug-in. For example, DF (Hz) = 50 for this plug-in is equivalent to DF = 100 for SSRC.

FFTFIRLIN - Leave at 1 unless otherwise required Its automatic and reflects AA and DF settings.